شاحنة مسطحة

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Tatra Phoenix 41.500 8x8 All-Wheel Drive with Fassi Crane including Jib and Winch

New vehicle with day registration 06/2025
Long-distance driver’s cab

Removable flatbed
Can be used as a tractor unit (semi-trailer truck)

• Model: TATRA PHOENIX
• Drive: 8X8/6, last axle driven and steered, planetary axles
• Engine: MX13, 390 kW (530 HP), 1675 rpm, 2500 Nm
• 1000 - 1425 rpm
• Transmission: Automated ZF TraXon 16TX2640, 16 speeds
• Steering: Left-hand drive
• Cab: Sleeper cab, H3279WHTE
• Gross vehicle weight: 41,500 kg
• Sleeper cab
• Side fenders
• External sun visor (green, translucent)
• Non-heated windshield
• Side and rear panels without windows
• Electrically adjustable mirrors
• Convex mirrors
• With proximity mirror, front
• Central locking with remote, 2 keys

Cab – Interior:
• Luxury air conditioning
• Storage tray under dashboard, long version
• Standard mattress, lower sleeper bunk
• Lower bed raised by 250 mm (sleeper cab, 260L storage compartment)
• No upper bed (long cab)
• Trailer couplings without middle section
• Cool box or refrigerator (sleeper cab)
• Aluminum roof hatch, manual operation
• Cab air-conditioning controls
• Dashboard in "Black Rock" color
• Textile cab wall covering
• Interior trim color “DARK SAND”
• 5-minute immobilizer SCM BV03-B1
• Standard accessory power supply

Communication & Driving Management:
• ALPINE communication system with camera
• Antennas: AM/FM + 2x GSM + GPS
• Digital tachograph
• With cruise control
• Prep for toll system (Germany only)

Wheels:
• Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed operation
• Spare wheel mounted on frame in transport position

Drivetrain:
• MX13, 390 kW (530 HP), 1675 rpm, 2500 Nm
• 1000 - 1425 rpm
• ZF 16TX2640TO TraXon, MX13 engine (355 kW, 390 kW)
• 2-stage ratio 2.30 TRK 0.61/1.44 H8, downshiftable from standstill

Chassis:
• Driven axle, axle load 10t, small wheels
• 8X8/6

Crane:

- Model: F710RA.2 xhe-dynamic
- Endless slewing range
- All hydraulic cylinders are double-acting
- Piston rods are hard chrome plated
- Dual linkage system with PROLINK (articulating jib arm extendable up to 10 degrees)
- Electronic overload cutoff device with FX900
- FASSI stability control FSC-SII including LMB II
- Emergency stop and visual alarm (90% and 100%)
- Pressure relief and load-holding valves
- XF System (Extra Fast), XP System (Extra Power), FL System (Full Lift)
- RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display
- Danfoss D900 control block with 4 control valves mounted on crane column
Ibsdpfxsxb Hw Ne Abxec
- Emergency controls for crane operation
- High-pressure filter supplied pre-installed
- Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base
- Hydraulic outriggers, both sides hydraulically extendable, outrigger width 8.29 m
- Outriggers operable by remote control (black/white)
- IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control
- Standard color RAL 3020 Traffic Red, all cylinders painted black
- Load hook and mounting clamps (short / 500 mm)
- Transport position: folded transverse to direction of travel
- Note: Observe onboard voltage—12V or 24V, standard 24V
- FASSI stability control FSC-S/II
- IE742 connection box
- Prepared for operation with variable displacement pump (LS)
- Prop-

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.