مركبة خدمات عامة

REFORM BOKI 2551E Friedhofsbagger

Cemetery Excavator - Fully Overhauled!!!

REFORM BOKI COMPACT EXCAVATOR 2551E - USED EQUIPMENT
CHASSIS NO. 1039448,
CURRENTLY WITH 3527 OPERATING HOURS

Fully Overhauled:
- Thoroughly cleaned
- Cabin repainted
- Support feet repainted
- New grapple shells
- Service performed: oils, filters, etc.
- UVV inspection passed

Standard Equipment:
- Three-wheel excavator with side steering
- Sound dampened
- Outside width adjustable from 0.83 to 1.25m
- Speed of 0-6km/h adjustable purely mechanically on the drawbar
- UVV approved
- GS mark "tested safety"

Engine:
- With water-cooled 4-cylinder diesel engine
- 23.2kW / 31.5 HP at 3,000 rpm according to DIN 70020
- Displacement 1,335ccm

Electrical System:
- Alternator 14V / 35A
- Battery 12V / 63 Ah
- Work lights

Drive System:
- Hydrostatic all-wheel drive via wheel hub motors
- BOKILOCK DIFFERENTIAL LOCK SYSTEM
- Activated from the drawbar and can be switched during operation
- Infinitely variable adjustment of the driving speed on the drawbar 0-6 km/h
- Mechanical start-up protection on the drawbar
- Sensored front axle for automatic activation of the boom safety function

Chassis:
- Torsionally rigid frame made of fine-grained steel

Steering:
- The spur gear is actuated via the steering drawbar

Brakes:
- Service brake via the hydrostatic drive

Tires:
- 18 x 9.50 - 8 (lawn tread)

Hydraulics:
- 2-lever joystick control on an adjustable control unit
- No visual obstruction due to control elements
- Pilot-operated hydraulic valves
- All functions are controlled proportionally
- Two-circuit hydraulics
- Hydraulic tank: 40 ltr., operating pressure: 180bar
- Biologically rapidly biodegradable hydraulic fluid
Godpfxs Ahyf Us Ag Rokd
- Based on Poly-Alpha-Olefins (PAO)
- Currently, the oil change interval is 4,000 operating hours
- (Water hazard class 1)

Swivel Gear:
- Superstructure rotates endlessly on an internally toothed slewing ring
- Locking via locking pin in the cabin

Excavator Structure:
- Reinforced boom and excavator arm made of hot-rolled MSH profiles
- Outreach 3,750mm from the outside edge of the base frame
- Automatic detection of the operating status activates the "boom push" function when the device is supported (this allows the pressure on the earth grab to be significantly increased under heavy ground conditions)
- Lifting force: 830 kp at 3,000mm
- Load holding valve, pre-tensioning valve and hose rupture protection
- 4 two-piece, hydraulic supports, play-free horizontal locking by means of forged toothed washers (unlimited adjustment possibilities)
- Support cylinders with integrated hose rupture protection (no risk of sinking in the event of any external damage to the hydraulic lines)
- Support plates with 2 insert claws

Grab Bucket:
- Earth grab / two-shell grab with integrated, central closing cylinder, grab rotation device approx. 210°
- Dimensions: 750 x 830 mm standard

Half Cabin:
- Completely lockable with side window, optimal view of the working area thanks to glazing that reaches down to the ground
- Windshield can be opened
- Entry-side curtain with window
- Foldable footrest
- Weatherproof, sprung and hydraulically dampened driver's seat
- Hot water blower heater

Dimensions and Weight:
- Length / transport position: 3,600mm
- Width: 830mm
- Height: 2,115mm
- Track min: 830mm
- Track max: 1,250mm
- Weight: 1,630kg
- Wheelbase: 1,680mm
- Turning radius: 1780mm

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.