جهاز قياس الاستدارة والأسطوانيةHommel Jenoptik
Hommel Etamic 4004
جهاز قياس الاستدارة والأسطوانية
Hommel Jenoptik
Hommel Etamic 4004
سنة الصنع
٢٠٠٩
الحالة
مستعمل
الموقع
Mielec 

البيانات الأساسية
- اسم الماكينة:
- جهاز قياس الاستدارة والأسطوانية
- الشركة المصنعة:
- Hommel Jenoptik
- طراز:
- Hommel Etamic 4004
- سنة الصنع:
- ٢٠٠٩
- الحالة:
- مستعمل
السعر والموقع
- الموقع:
- SSE EURO-PARK, Polskiego 3, 39-300 Wojska, Polen

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A23356949
- تحديث:
- آخر مرة في 19.11.2026
وصف
Application area and features:
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
Ieds Ak Huzopfx Akgjii
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
• Measurement task: Determination of form and position tolerances (e.g. circularity and flatness) as well as evaluation using software solutions such as Turbo Form.
Ieds Ak Huzopfx Akgjii
• Workpiece alignment: Automatic centering and tilting of the workpiece (in contrast to the F1004 and F2004 variants with manual alignment).
• Air-bearing rotary axis (C-axis): Rotary table with a diameter of 250 mm, a speed of 1–10 rpm, and a 4096-point angular resolution.
Technical specifications (according to the F1004–F4004 data sheet):
• Max. measuring height: 350 mm (in practice, larger workpiece dimensions are also specified depending on the measuring setup/application).
• Max. test diameter: 380 mm.
• Max. load: 40 kg.
• Circularity deviation: 0.05 µm + 0.0005 µm/mm measuring height.
• Axial flatness: 0.04 µm + 0.0005 µm/mm radius.
• Centering/tilting range: ± 2 mm / ± 0.6°.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2020
١٩ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 9733 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ








