ماكينة لحام TIGH.W. Hermann GmbH
SHARC 320 T DC
ماكينة لحام TIG
H.W. Hermann GmbH
SHARC 320 T DC
سنة الصنع
٢٠٠٧
الحالة
مستعمل
الموقع
Malsch 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- ماكينة لحام TIG
- المصنّع:
- H.W. Hermann GmbH
- الموديل:
- SHARC 320 T DC
- سنة الصنع:
- ٢٠٠٧
- الحالة:
- مستعمل
السعر والموقع
- الموقع:
- Malsch

اتصل
تفاصيل العرض
- معرّف القائمة:
- A19034296
- الرقم المرجعي:
- 1058-25089
- التحديث الأخير:
- في ٠٧.٠٥.٢٠٢٥
الوصف
weight of the machine ca. 290 kg
dimensions of the machine ca. 1050 x 560 x 840 mm
The SHARC T power source is a TIG welding unit for
direct current welding (DC version) and for direct and alternating current
welding
(AC/DC version) based on an innovative
arc forming process developed by Hermann GmbH.
In application, the SHARC process leads to higher welding speed
with simultaneous improvement of the weld quality and reduction of the
ancillary welding costs (less distortion, improved penetration, reduced
annealing colours of the workpiece, less hardening of the transition edge zones
and, if required, no need for filler materials).
--> Technical data Welding current type: DC
--> Mains voltage (50/60 Hz): 400 V
--> Phases: 3
--> Setting range: 10 -320 A
--> Electrode setting range: 25- 280 A
--> Welding voltage: 22 V
--> Open circuit voltage without HF: 70 V
--> Open circuit voltage with HF: 90 V
--> Primary power: 23 kVA
--> Duty cycle 60%: 320
Hnodpfowf Rg Esx Af Heg
--> Duty cycle 100%: 260
--> Cooling type: F
--> Protection class: IP 23
dimensions of the machine ca. 1050 x 560 x 840 mm
The SHARC T power source is a TIG welding unit for
direct current welding (DC version) and for direct and alternating current
welding
(AC/DC version) based on an innovative
arc forming process developed by Hermann GmbH.
In application, the SHARC process leads to higher welding speed
with simultaneous improvement of the weld quality and reduction of the
ancillary welding costs (less distortion, improved penetration, reduced
annealing colours of the workpiece, less hardening of the transition edge zones
and, if required, no need for filler materials).
--> Technical data Welding current type: DC
--> Mains voltage (50/60 Hz): 400 V
--> Phases: 3
--> Setting range: 10 -320 A
--> Electrode setting range: 25- 280 A
--> Welding voltage: 22 V
--> Open circuit voltage without HF: 70 V
--> Open circuit voltage with HF: 90 V
--> Primary power: 23 kVA
--> Duty cycle 60%: 320
Hnodpfowf Rg Esx Af Heg
--> Duty cycle 100%: 260
--> Cooling type: F
--> Protection class: IP 23
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2003
تقديم الطلب
الهاتف & فاكس
+49 7246 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Malsch
٣٬١٢٧ km
ماكينة لحام TIG
H.W. Hermann GmbHSHARC 320 T DC
H.W. Hermann GmbHSHARC 320 T DC
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
آلة تنقية
FakierECO50B
FakierECO50B
إعلان صغير
Malsch
٣٬١٢٧ km
ماكينة لحام TIG
H.W. Hermann GmbHSHARC 320 T DC
H.W. Hermann GmbHSHARC 320 T DC
إعلان صغير
Sieradz
٢٬٩٤٠ km
مولد
Proton10000 360 (DUAL)
Proton10000 360 (DUAL)
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
مثقاب مغناطيسي 265 فولت/200 هرتز
Magnetor AEGP8 32 L HBE-IV
Magnetor AEGP8 32 L HBE-IV
إعلان صغير
ألمانيا
٣٬٢٠٨ km
جهاز لحام MIG/MAG
JäckleMIG 405
JäckleMIG 405
إعلان صغير
Gebhardshain
٣٬٢٩٨ km
آلة لحام
JäckleMig 505 / MC 16
JäckleMig 505 / MC 16
إعلان صغير
Weiterstadt
٣٬١٩٢ km
يجب تخليص معا لنجلس معا
SELCOArkoquad 220
SELCOArkoquad 220
إعلان صغير
ألمانيا
٣٬٢٠٨ km
نظام الترقق
AutobondMini 105 THS
AutobondMini 105 THS
إعلان صغير
Gebhardshain
٣٬٢٩٨ km
آلة لحام البقعة
DALEXSF 8/71
DALEXSF 8/71
تم حذف إعلانك بنجاح
حدث خطأ











































































