آلة حفر شعاعي سريعة

DONAU Danumeric 440

Machine design
Dksdpfx Aajrmkfnolju
- Work table 1800 x 600 mm with 4T-slots
- Boom travel 1050 mm
- SK 40 drilling spindle with tool clamping device
- Infinitely variable speed programming
- Infinitely variable quill feed via three-phase servo motor
- 2 T-slots 18 mm on the machine base at the rear
- 2 T-slots 18 mm on the left machine base frame
- Thread cutting device
- Central lubrication
- Coolant device
- Machine light
- CE marking
- Safety device
- USB interface


Dimensions and travels
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column stroke (W-axis) mm 410
Distance spindle bottom edge - min mm 70
Table top edge max. mm 680
Distance spindle bottom edge - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Worktable height mm 900

Cutting values
Drilling capacity into solid St 60  40
GG 22  50
Thread cutting St 60 M 36
GG 22 M 42

Main spindle drive
AC motor, frequency-controlled kW 5.5 at 100 % duty cycle.
Speed range: min -1 15 - 2800
Torque Nm max. 250
constant from min -1 15 - 2000

Feed drives
X-axis - AC - servo motor kW 0.25
Y-axis - AC - servo motor kW 0.25
Z-axis - AC - servo motor kW 4.50
W-axis - AC - servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5
Rapid traverse speeds (W): m/min. 3
Feed rates stepless mm/min 5 - 2000

Accuracy
Positioning accuracy X-, Y-axis
to 1200 mm mm ± 0.075

Electrical data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0

Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800

CNC control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat screen, backlit, easy to read from all sides
legible from all sides, 215 x 160 mm
Position information: Cartesian or polar, absolute or incremental measurements,
Unit of measurement: mm or inch or in degrees
Interpolation: 2 axes (X, Y)

Technology database: tool management, tool suggestions according to
machining type, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes

Machining cycles

Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for
by manually probing the workpiece for:
- any clamped rectangular parts
- any clamped round parts
- Mediation of cast and flame-cut parts
- Angular position detection for round parts by touching
reference edges or surfaces
Test graphics Graphic display of drilling patterns
Data interfaces USB

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.