آلة حفر شعاعي سريعة

DONAU Danumeric 440

Machine design
• Work table 1800 x 600 mm with 4T-slots
• Boom travel 1050 mm
• Drill spindle SK 40 with tool clamping device
• Stepless speed programming
• Stepless spindle feed via three-phase servo motor
• 2 T-slots 18 mm on the machine base frame at the back
• 2 T-slots 18 mm on the machine base frame on the left
• Thread cutting device
• Central lubrication
• Coolant device
• Machine light
• CE marking
• Safety device
• USB interface

Dimensions and travel paths
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Spindle stroke (Z axis) mm 200
Column stroke (W axis) mm 410
Distance from lower edge of spindle - min mm 70
Top edge of table max. mm 680
Distance from bottom edge of spindle - min mm 970
Floor max. mm 1580
Gbedpfx Agsvv Spkocsg
Drilling radius mm 540 - 1590
Work table height mm 900
Cutting values
Drilling performance into solid material St 60  40
GG 22  50
Thread cutting St 60 M 36
GG 22 M 42
Main spindle drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle.
Speed range: min -1 15 - 2800
Torque Nm max. 250
constant from min -1 15 – 2000
Feed drives
X-axis - AC - servo motor kW 0.25
Y-axis - AC - servo motor kW 0.25
Z-axis - AC - servo motor kW 4.50
W-axis - AC - servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5
Rapid traverse speeds (W): m/min. 3
Feeds continuously variable mm/min 5 – 2000

Accuracy
Positioning accuracy X, Y axis
to 1200 mm mm ± 0.075

Electrical data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0

Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800

CNC control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm
Position information: Cartesian or polar, absolute or incremental dimensions,
Unit of measurement: mm or inch or in degrees
Interpolation: 2 axes (X, Y)

Technology database: tool management, tool suggestions according to

machining type, material-dependent cutting data suggestions

Tool management: max. 500 tools

Sub-program technology: yes

Machining cycles

Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry
Zero point determination: cycles for determining zero points by manually

probing the workpiece for:

- any rectangular parts clamped

- any round parts clamped

- transfer of cast and burnt parts

- angular position detection for round parts by probing

reference edges or surfaces

Test graphics Graphic display of drilling patterns

Data interfaces USB

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.