ضبط مسبق للأدوات

Zoller Venturion 450

ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use

The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement.

THE ADVANTAGES
- Very little use, new condition, last ZOLLER maintenance 12/2022
- CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools
- Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected
- pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines
- Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50

TECHNICAL DATA
- Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm
- max. tool weight 50 kg
- 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar
- W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg

EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016)
1. Z05MK446.11 USB camera with optics and integrated LED incident light
2. Z05E6187 Transmitted light "pilot" "DLR" / V-series
3. Z05E6127.11 USB camera with optics and integrated LED incident light
4. V429530-01 HGV-ACE mounting assembly vent. 450+600
5. V429515 Accessory kit for drive and ROD "venturion 450/600"
6. N001831 Drive unit linear CNC/"usbmotion"
7. N001831 Drive unit linear CNC/"usbmotion"
8. N001918 Drive unit rotary CNC/"usbmotion"
9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80
10. Z05E7026-01 USB motion controller
11. Z05E6038-00 Valve module Z100-V
12. Z05E6037-20 24V voltage distribution with fuses
13. Z05E6035-10 Lighting module Z100-L
14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U
15. Z9734883-01 Printer for TH labels, print width 25–108 mm
16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz

ADDITIONALLY INCLUDED
Hsdps Advkzjfx Ahfjw
- Adapters SK 40, VDI 40 and VDI 50
- Control unit on stand with monitor, keyboard and mouse
- Software ZOLLER pilot 3.0
- Cables and small parts as shown in the photos
Tools and tool holders are not included in the scope of delivery.

SERVICE
By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport.

TRANSACTION
Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached.

Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.