رافعات شوكية ديزلYale
GDP80VX9
رافعات شوكية ديزل
Yale
GDP80VX9
في بي بالإضافة إلى ضريبة القيمة المضافة
٤٥٬٠٠٠ €
سنة الصنع
٢٠٢١
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Essen 

البيانات الأساسية
- اسم الماكينة:
- رافعات شوكية ديزل
- الشركة المصنعة:
- Yale
- طراز:
- GDP80VX9
- سنة الصنع:
- ٢٠٢١
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٨٦٢ h
السعر والموقع
في بي بالإضافة إلى ضريبة القيمة المضافة
٤٥٬٠٠٠ €
- تأجير:
- ممكن
- موقع البائع:
- Wilhelm-Beckmann-Straße 16, 45307 Essen, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
وزن فارغ:
١٢٬٤١٧ كجم
الطول الكلي:
٥٬٢٣٨ مم
ارتفاع الرفع:
٤٬٥٦٥ مم
رفع حر:
٦٥ مم
ارتفاع البناء:
٣٬٤٦٥ مم
عرض البناء:
٢٬٢٣٩ مم
المحرك وعلبة التروس
نوع الوقود:
ديزل
ملحقات
طول الشوكات:
١٬٦٠٠ مم
عرض إطار الشوكة:
٢٬٠١٥ مم
مزيد من التفاصيل
قدرة:
٨٢ كيلوواط (١١١٫٤٩ حصان)
نوع السارية:
دوبلكس
نوع القيادة:
Diesel
سعة التحميل:
٨٬٠٠٠ كجم
تفاصيل العرض
- معرّف الإعلان:
- A23275402
- رقم المرجع:
- 13765
- تحديث:
- آخر مرة في 03.11.2026
وصف
Diesel forklift
Load center: 900
Fork width: 200 mm
Fork thickness: 70 mm
ISO class: ISO Class 4 = 5,000 - 10,000 kg
Mast type: Duplex
Transmission: Techtronix 332+ 3-speed transmission
Speed class: 25
Condition: Ready for use and fully functional
Technical condition: very good
Front tire type: Superelastic
Front tire condition: 40 - 60%
Rear tire type: Superelastic
Bodpfx As Ahl Rmjnyedi
Rear tire condition: 40 - 60%
Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Machine will be cleaned before delivery!
Turret, fork positioner,
Hydr. rotating FORK POSITIONER, Series S 11-ZV 80-360°-SO Load capacity 4,500 kg at 1,500 mm load center. Rotation range 360° in both directions, infinitely adjustable fork positioner range 560 - 1,600 mm measured from the outer edge, or 360 - 1,400 mm measured center-to-center. With center stop in front of the carriage rollers, widened slide guide, all hydraulic hoses with heat protection. In addition, the fork positioner has an oil motor protection. The lines of the oil motors are routed in pipes. The hoses are heat-resistant. The cylinder pressure is limited outwards and inwards so that the fork positioner cannot be used for clamping. Technical data: Weight: 2,300 kg ESP: 340 mm Overall dimension: 360 mm (to the rear edge of the carriage)
3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, special design, interior mirror, LED,
- Drivetrain protection system with engine shutdown - Premium monitoring package - Speed limiter preset to 13 km/h (adjustable) - Mast inclination - 5° forward/6° backward - Accutouch mini-lever hydraulic controls - Automatic hydraulic control - Red seat belt with restraint system - 2 front and 1 rear LED work lights with brake, tail, turn, and reversing lights - Yellow rotating beacon - Activated via ignition switch - Pedestrian warning light (P.A.L) at the front and rear - LED lights mounted on the mast - Red Line (Side) Pedestrian Awareness Lights (Keyswitch Activated) - Key Activated (Automatic) Lights
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Load center: 900
Fork width: 200 mm
Fork thickness: 70 mm
ISO class: ISO Class 4 = 5,000 - 10,000 kg
Mast type: Duplex
Transmission: Techtronix 332+ 3-speed transmission
Speed class: 25
Condition: Ready for use and fully functional
Technical condition: very good
Front tire type: Superelastic
Front tire condition: 40 - 60%
Rear tire type: Superelastic
Bodpfx As Ahl Rmjnyedi
Rear tire condition: 40 - 60%
Description: Machine completely workshop-tested, cleaned, and with new UVV and inspection certificates! Machine will be cleaned before delivery!
Turret, fork positioner,
Hydr. rotating FORK POSITIONER, Series S 11-ZV 80-360°-SO Load capacity 4,500 kg at 1,500 mm load center. Rotation range 360° in both directions, infinitely adjustable fork positioner range 560 - 1,600 mm measured from the outer edge, or 360 - 1,400 mm measured center-to-center. With center stop in front of the carriage rollers, widened slide guide, all hydraulic hoses with heat protection. In addition, the fork positioner has an oil motor protection. The lines of the oil motors are routed in pipes. The hoses are heat-resistant. The cylinder pressure is limited outwards and inwards so that the fork positioner cannot be used for clamping. Technical data: Weight: 2,300 kg ESP: 340 mm Overall dimension: 360 mm (to the rear edge of the carriage)
3rd valve, 4th valve, rear work light, front work light, full cabin, CE certificate, special design, interior mirror, LED,
- Drivetrain protection system with engine shutdown - Premium monitoring package - Speed limiter preset to 13 km/h (adjustable) - Mast inclination - 5° forward/6° backward - Accutouch mini-lever hydraulic controls - Automatic hydraulic control - Red seat belt with restraint system - 2 front and 1 rear LED work lights with brake, tail, turn, and reversing lights - Yellow rotating beacon - Activated via ignition switch - Pedestrian warning light (P.A.L) at the front and rear - LED lights mounted on the mast - Red Line (Side) Pedestrian Awareness Lights (Keyswitch Activated) - Key Activated (Automatic) Lights
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2024
١٢٠ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 201 8... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Essen
٣٬٣٩٢ km
رافعات شوكية ديزل
YaleGDP80VX9
YaleGDP80VX9
تم حذف إعلانك بنجاح
حدث خطأ

















