مخرطة خلفيةWMW
DH 250III x630
مخرطة خلفية
WMW
DH 250III x630
الحالة
مستعمل
الموقع
ألمانيا 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
- الموقع:
- , ألمانيا
اتصل
تفاصيل العرض
- معرّف القائمة:
- A17865596
- الرقم المرجعي:
- 1087-0300018
- التحديث الأخير:
- في ٠٩.٠٧.٢٠٢٥
الوصف
Technical details:
turning length: 630 mm
swing diameter over slide rest: Hinterdrehschlitten: 250 mm
center height over bed: 270 mm
centre distance: 900 mm
spindle bore: 26 mm
range of revolutions per minute - continous: 1,8 - 450 U/min
return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min
cross feed: 0,07 - 1,11 / 36 step mm/U
longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U
tailstock quill taper MT: 5
quill travel: 250 mm
Total power requirement: 7,0 kW
machine weight approx.: 3,9 t
dimension machine xH: 3,2 x 1,2 x 1,8 m
Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch).
Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine.
Main drive via 8-stage manual gearbox.
Feed gearbox is designed as a 12-stage manual gearbox.
Swiveling range of the rear slide = 360deg.
Swiveling range of the cross slide = 360degrees
Isdovbh N Repfx Abxsih
Equipment:
lathe chuck driving disc Ø 210 mm with fixed tip
fixed tip in tailstock
with 4 pieces machine feet
3 jaw chuck Ø 250 mm
i.D.
*
turning length: 630 mm
swing diameter over slide rest: Hinterdrehschlitten: 250 mm
center height over bed: 270 mm
centre distance: 900 mm
spindle bore: 26 mm
range of revolutions per minute - continous: 1,8 - 450 U/min
return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min
cross feed: 0,07 - 1,11 / 36 step mm/U
longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U
tailstock quill taper MT: 5
quill travel: 250 mm
Total power requirement: 7,0 kW
machine weight approx.: 3,9 t
dimension machine xH: 3,2 x 1,2 x 1,8 m
Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch).
Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine.
Main drive via 8-stage manual gearbox.
Feed gearbox is designed as a 12-stage manual gearbox.
Swiveling range of the rear slide = 360deg.
Swiveling range of the cross slide = 360degrees
Isdovbh N Repfx Abxsih
Equipment:
lathe chuck driving disc Ø 210 mm with fixed tip
fixed tip in tailstock
with 4 pieces machine feet
3 jaw chuck Ø 250 mm
i.D.
*
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+49 341 6... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ