من -70 درجة مئوية إلى +180 درجة مئوية، سعة 600 لترWeiss Temperaturprüfschrank
WT-600/70/5
من -70 درجة مئوية إلى +180 درجة مئوية، سعة 600 لتر
Weiss Temperaturprüfschrank
WT-600/70/5
الحالة
مستعمل
الموقع
Borken 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- من -70 درجة مئوية إلى +180 درجة مئوية، سعة 600 لتر
- الشركة المصنعة:
- Weiss Temperaturprüfschrank
- طراز:
- WT-600/70/5
- الحالة:
- جيد جدًا (مستعمل)
السعر والموقع
- الموقع:
- Einsteinstraße 8a, 46325 Borken, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A21708723
- رقم المرجع:
- 25132
- تحديث:
- آخر مرة في ١٤.٠٤.٢٠٢٦
وصف
Weiss Umwelttechnik WT-600/70/5
Temperature Test Chamber -70°C to +180°C
Water-cooled
Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik.
The unit is fully functional and has been tested.
This is a temperature-only test chamber without humidity control.
The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions.
It is widely used in industry, development, and quality assurance processes.
The temperature range spans from -70°C to +180°C.
The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber.
Cable ports of 125 mm and 50 mm are included.
Technical data:
Model: WT-600/70/5
Cooling / heating operation: -70°C to +180°C
Temperature change rate:
Cooling: approx. 6 K/min
Heating: approx. 6 K/min
External dimensions (with hinges and door lock):
Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm
External dimensions (without hinges and door lock):
Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm
Internal dimensions:
Height: 950 mm, Width: 800 mm, Depth: 800 mm
Test chamber volume: approx. 600 liters
Electrical connection: 3/N/PE AC 400V ±10% 50Hz
Nominal power: 16 kW
Nominal current: 19 A
Main fuse required: 29 A slow-blow
Permissible test load:
Total rack capacity: 80 kg
Gedpfxsy At Sxs Aaheua
Chamber floor: 80 kg, Shelf: 40 kg
Refrigerant: R 404A/R23
Weight: 675 kg
For your safety as a buyer, please note the following:
The following procedures are performed on all chambers we offer:
1. Functional inspection and replacement of necessary components
2. New filling with legally compliant refrigerant
3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment.
Condition: used
Scope of delivery: (see picture)
(Specifications subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Temperature Test Chamber -70°C to +180°C
Water-cooled
Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik.
The unit is fully functional and has been tested.
This is a temperature-only test chamber without humidity control.
The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions.
It is widely used in industry, development, and quality assurance processes.
The temperature range spans from -70°C to +180°C.
The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber.
Cable ports of 125 mm and 50 mm are included.
Technical data:
Model: WT-600/70/5
Cooling / heating operation: -70°C to +180°C
Temperature change rate:
Cooling: approx. 6 K/min
Heating: approx. 6 K/min
External dimensions (with hinges and door lock):
Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm
External dimensions (without hinges and door lock):
Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm
Internal dimensions:
Height: 950 mm, Width: 800 mm, Depth: 800 mm
Test chamber volume: approx. 600 liters
Electrical connection: 3/N/PE AC 400V ±10% 50Hz
Nominal power: 16 kW
Nominal current: 19 A
Main fuse required: 29 A slow-blow
Permissible test load:
Total rack capacity: 80 kg
Gedpfxsy At Sxs Aaheua
Chamber floor: 80 kg, Shelf: 40 kg
Refrigerant: R 404A/R23
Weight: 675 kg
For your safety as a buyer, please note the following:
The following procedures are performed on all chambers we offer:
1. Functional inspection and replacement of necessary components
2. New filling with legally compliant refrigerant
3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment.
Condition: used
Scope of delivery: (see picture)
(Specifications subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 2861 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ

















