آلة قابلة للطي

WEINIG Univar 10/3

Number of spindles 4 St.
Number of tools 11 St.
Spindle diameter 50,40 mm
Gbsdpfxsvnv Uus Abzei
Spindle length 285,125 mm
length 4000 mm
width 2000 mm
height 2200 mm
Weinig Univar 10/3 folding machine
-----
For milling around windows, doors and the like with uneven
circumferential profiles. Machine suitable for wood thickness 68 to 92 mm

Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.

The available tool positions are selected using a selector switch on the
control panel
retrieved.

Machine with 3 hydraulically controlled right precision
Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle
The spindle stroke takes place in a U-movement, so that the opening is possible
for short parts
The milling stop remains as small as possible. Spindle stroke horizontally fine
Adjustable for both tool positions from the operator side.
Central lubrication for the spindle units.

The 1.
Spindle can be selected in right-left rotation.

This spindle dips the last 100 mm of each frame end
appropriate synchronization tool into the passing wood. Through this
This prevents the tool of the subsequent milling spindle from running in the
opposite direction
working, causing tearouts. Excavation of the first 7 transport rollers using
Footswitch. This shortens the lead time. An additional
The support rail also allows large-format frames to be milled around.

Continuous, chainless rubber roller feed with extreme
short roller spacing. Height adjustment of the feed bar
electrically readable.

Electrical version according to VDE.

Machine including operating tools, but without processing tools
tools.

Technical data:

Working width min. 40 mm
Working height min. 30 mm, max. 100 mm

1. Profiling spindle (synchronous and counter-rotation)
----- --
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm
with synchronous automatic immersion

2. Profiling spindle
-----
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm

3. Profiling spindle
-----
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm

4. Profile spindle - fitting unit on the right
-----
For milling the fitting groove in the milling cycle
or for grooving in the longitudinal profile.
Pneumatic horizontal movement with
Selector switch in the control panel.
Motor 2.2 KW
Speed 6,000 rpm
Spindle diameter 40 mm
Clamping height 125 mm, 2 tools
Tool flight circle min. 140 mm, max. 180 mm

Motor power feed 1.1 kW
Feed speed 6 - 12 m/min.
...