مخرطة مغزل الرصاص / العلفWeiler
Commodor Geometrisch Überholt
مخرطة مغزل الرصاص / العلف
Weiler
Commodor Geometrisch Überholt
الحالة
مستعمل
الموقع
Ubstadt-Weiher 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- مخرطة مغزل الرصاص / العلف
- الشركة المصنعة:
- Weiler
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
- الموقع:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A18287011
- تحديث:
- آخر مرة في ١٧.٠١.٢٠٢٥
وصف
Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
Hjdsvrcqdopfx Ahvofd
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Technical data:
>> Machine no. 1824
>> Center height 180 mm
>> Center width 1000 mm
>> Spindle speeds: from 13 to 2000 rpm
>> Spindle passage 56 mm
>> Short taper spindle head DIN 55029 size 5
>> Tailstock MK 4
>> Feed rates from 0.026 to 0.888 mm / rev
>> Possible threads metric, inch, module and diametric pitch
>> Metric thread pitches from 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle brake can be switched on
>> Drive power 2.0/4.0 KW
>> Length 2.2 m, height 1.5 m, depth 1 m
Accessories and equipment:
>> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions
Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction,
>> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws
>> Mulifix size B with 2 pcs steel holders NEW
>> Bed stop
>> Machine feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle protection
>> Spindle brake
>> 2 emergency stops
On request: covers for the guide. and feed spindle
About the machine:
A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint.
The Multifix and chuck accessories are new.
Hjdsvrcqdopfx Ahvofd
For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
إرسال طلب
هاتف & فاكس
+49 7251 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Ubstadt-Weiher
٣٬١٣٥ km
مخرطة مركزية
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
إعلان صغير
Mindelheim
٢٬٩٤٧ km
مركز مخرطة ومخرطة المغزل
TC 165 VMIOTAL®
TC 165 VMIOTAL®
إعلان صغير
Ubstadt-Weiher
٣٬١٣٥ km
مخرطة مغزل الرصاص / العلف
WeilerCommodor Geometrisch Überholt
WeilerCommodor Geometrisch Überholt
إعلان صغير
Terrassa
٣٬٠٩٣ km
مجفف تجميد. التجفيف بالتجميد
REVAFFD R&D
REVAFFD R&D
إعلان صغير
Sankt Egidien
٣٬٠٨١ km
مخرطة مغزل الرصاص / العلف
OptimumOPTIturn TH 4620D
OptimumOPTIturn TH 4620D
إعلان صغير
Ubstadt-Weiher
٣٬١٣٤ km
مخرطة مغزل الرصاص / العلف
WEILERCommodor B - Teilüberholt
WEILERCommodor B - Teilüberholt
إعلان صغير
Wetzlar
٣٬٢٥٣ km
مخرطة مغزل الرصاص / العلف
CONTURSJ-520/1500 VS
CONTURSJ-520/1500 VS
إعلان صغير
Witten
٣٬٣٧٦ km
مركز مخرطة ومخرطة المغزل
COLCHESTERSTUDENT 2500
COLCHESTERSTUDENT 2500
إعلان صغير
Bienne
٣٬٠٥٨ km
آلة طحن
Schaublin13
Schaublin13
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
مخرطة 420 × 1340 مم
Weisser**PF200
Weisser**PF200
تم حذف إعلانك بنجاح
حدث خطأ
























































































