آلة ثني الأنابيب الأوتوماتيكيةWegener
PBM 7074
آلة ثني الأنابيب الأوتوماتيكية
Wegener
PBM 7074
السعر الافتتاحي دون ضريبة القيمة المضافة
٣٣٦٬٠٠٠ €
سنة الصنع
٢٠١٥
الحالة
جديد
الموقع
Alojzov 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- آلة ثني الأنابيب الأوتوماتيكية
- المصنّع:
- Wegener
- الموديل:
- PBM 7074
- سنة الصنع:
- ٢٠١٥
- الحالة:
- جديد
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
السعر الافتتاحي دون ضريبة القيمة المضافة
٣٣٦٬٠٠٠ €
- الموقع:
- Alojzov 171, 798 04 Alojzov, Česká republika

اتصل
تفاصيل العرض
- معرّف القائمة:
- A17644843
- التحديث الأخير:
- في ٣٠.١٠.٢٠٢٥
الوصف
Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends
Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness.
Tube bends can be manufactured with a final bend angle of 90°.
Variable bend angle adjustment
Simultaneous heating of the bending blank in the radiator field
Rotation of bending blanks during heating to achieve homogeneous heating
The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes
Njdpsu Itlnefx Ag Ijli
Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements.
Siemens PLC control system with touchscreen user interface
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness.
Tube bends can be manufactured with a final bend angle of 90°.
Variable bend angle adjustment
Simultaneous heating of the bending blank in the radiator field
Rotation of bending blanks during heating to achieve homogeneous heating
The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes
Njdpsu Itlnefx Ag Ijli
Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements.
Siemens PLC control system with touchscreen user interface
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2024
تقديم الطلب
الهاتف & فاكس
+420 582 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




