آلة فرم - مقص دوّارVon der Mehden GmbH
Rewowi 990NZ Quad
آلة فرم - مقص دوّار
Von der Mehden GmbH
Rewowi 990NZ Quad
FCA في بي بالإضافة إلى ضريبة القيمة المضافة
٥٩٬٠٠٠ €
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Innsbruck-Land 

البيانات الأساسية
- اسم الماكينة:
- آلة فرم - مقص دوّار
- الشركة المصنعة:
- Von der Mehden GmbH
- طراز:
- Rewowi 990NZ Quad
- الحالة:
- جاهز للاستخدام (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٣٬٠٠٠ h
السعر والموقع
FCA في بي بالإضافة إلى ضريبة القيمة المضافة
٥٩٬٠٠٠ €
- تأجير:
- ممكن
- الموقع:
- Innsbruck-Land, النمسا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
٤٬٥٠٠ كجم
تفاصيل القدرة
جهد الدخل:
٤٠٠ V
نوع تيار الإدخال:
ثلاثي الطور
مزيد من التفاصيل
طول الدوار:
١٬٠٠٠ مم
عرض الدوار:
٩٩٠ مم
تفاصيل العرض
- معرّف الإعلان:
- A23349086
- تحديث:
- آخر مرة في 18.11.2026
وصف
The Quad 990 from Von der Mehden GmbH is a slow-speed, four-shaft shredder specifically designed for continuous industrial operation in data privacy-compliant document destruction.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
Iedps Akv I Tjfx Akgoii
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
Iedps Akv I Tjfx Akgoii
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد: الأسبوع الماضي
مسجل منذ: 2026
١ إعلان على الإنترنت
إرسال طلب
هاتف & فاكس
+49+43660... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ












