شاحنة ذات هياكل قابلة للتبديل

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Chassis – New Vehicle: – MODEL 2024

• Manufacturer/Type: Volvo FH500 6x2, wheelbase 3,700 mm, VIN: To be provided.
• Detailed vehicle specifications can be found in the attached documentation.
• Oil pump type: LEDUC
• Fifth wheel with sliding device and self-lubrication (Type Jost JSK), mounted on the subframe
• Cover for the front support leg with company logo (engraved/smooth steel sheet)

Body:
Crane Exchange System:
The superstructure including the crane can be removed, and a fifth wheel can be mounted onto the chassis for this purpose. The combination of crane and body including the fifth wheel is also possible. The vehicle is equipped with two fifth wheels in total, each longitudinally movable.

• Installation/bolting of crane and main outrigger support to the subframe.
• Installation of all hydraulic and electrical connections. Installation location: front
• Platform body executed as a steel/welded construction, removable
• Length approx. 380 cm, width approx. 248 cm
• Platform body painted, colour shade according to RAL (chassis colour)
• Removable aluminium sideboards, Brand Suer, 600 mm high, anodised version with steps, removable posts with Kinngripp system.
• Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis colour)
• 6 retractable lashing rings (2,500 daN each) per side, fitted in a slotted rail for flexible positioning.
• 4 x lashing points for chains (6,500 daN), 2 at the front and 2 at the rear of the body
• Robust front wall consisting of a welded frame with welded-on 4 mm steel sheet and 5 accessory hooks, front wall height approx. 1,300 mm, steel painted finish, with 2 foldable lugs for lashing straps, welded on.
• Covering plates and fenders made from aluminium chequer plate (sandblasted, powder coated, and painted)
• Multifix stanchion pockets: 2 rows with approx. 80 cm spacing from front wall and rear
• Holders (for support plates, crane mats) made of galvanized steel
• Additional support fitted beneath chassis
• Installation of rear underrun protection and additional support, with installation of hydraulic and electric connections
• Duomatic and red/yellow connections at the front for semitrailers, as well as at the rear for trailers

• New crane, type FASSI F545 RA 2.27, continuous slew, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions
• Detailed crane specifications are included in the attached documentation
• Series 5450
Lodpoy E A Stefx Aaverk
• Initial TÜV-UVV acceptance and parameterization of the crane will be carried out in accordance with the technical regulations and load charts of FASSI hydraulic loaders

Additional equipment and crane accessories:
• 5 crane outrigger pads with holders, arranged per production drawings
• AWC (Automatic Wire Rope Length Control)
• Operation manual, maintenance handbook, and crane inspection record

Lighting:
• 2 x LED working lights integrated in the front wall
• 2 x rotating beacons on the FH cab roof
• 2 x strobe lights in the bonnet
• 2 x LED lights under the rear, left and right, positioning as required
• 4 x LED working lights, 2 on each side under the body in the area of the supports
• 4 x yellow LED light strips, one at each support

Further information available on request.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.