رافعة مثبتة على شاحنة

VOLVO FH500 6x2 mit Fassi F545 2.27 JIB Winde sofort

Chassis – New Vehicle: – NEW MODEL 2025

• Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm
• Fifth-wheel plate with sliding device and self-lubricating (Jost JSK type), mounted on the subframe
• Reversing camera fully installed.

Bodywork:
• Execution of all required chassis modifications for crane installation, disassembly and reassembly of attachments, exhaust system, tanks, etc., and adaptation of the vehicle frame.
• All chassis and bodywork procedures are carried out in strict adherence to the bodybuilder guidelines from the respective chassis manufacturer and are executed to the highest quality.
• Complete installation of a special subframe, developed in-house and manufactured in-house from fine-grain steel, for crane and bodywork. The fully welded and bolted subframe to the chassis frame ensures exceptional torsional rigidity and perfect crane vehicle stability. A unique selling point is the subframe design. Execution is to the highest quality and painted in frame color.
• Mounting/bolting of crane and main outrigger support to the subframe. Installation of all hydraulic and electrical connections. Installation location: front
• Platform body as detachable steel/welded construction
• Approx. length 380 cm, approx. width 248 cm
• Platform body painted in RAL chassis color
• Detachable aluminum drop sides, Suer brand, height 600 mm, anodized finish with stair steps, removable posts with Kinngripp handhold
• Standard platform floor in welded, painted 4 mm steel checker plate (RAL chassis color)
• 6 recessed lashing rings 2500 daN per side in slotted rail with flexible arrangement
• 4 x lashing brackets for chains 6500 daN (2 front, 2 rear on the body)

• Sturdy bulkhead made of welded frame, welded 4 mm steel sheet, and 5 accessory hooks; bulkhead height approx. 1300 mm, version: painted steel, with 2 foldable lashing eyes welded on for tie-down straps.
• Cladding sheets, mudguards from aluminum checker plate (sandblasted, powder coated, and painted). Please specify RAL color codes.
• 2 x BROSSBOX toolboxes, aluminum checker plate (sandblasted, powder coated, and painted). Please specify RAL color codes; size and arrangement depend on wheelbase/available space.
• 1 x BROSSBOX toolbox, between the crane and the bulkhead.
• Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from bulkhead and rear.
• Brackets (for outrigger pads, crane pads) made of galvanized steel.
• Additional outrigger support installed under chassis.
• Installation of a rear underrun protection and additional support, including hydraulic and electrical connections.
Djdpoxfdp Djfx Aalswc
• Duomatic and red/yellow couplings, front for semi-trailer and also at rear for trailer.

New crane, FASSI F545 RA 2.27, continuously rotating, fully mounted, installed, and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions.

Additional equipment and crane accessories:
• 5 x crane outrigger pads with holders, arrangement as per technical drawing
• AWC (automatic rope length control)
• Operating manual, maintenance manual, and crane inspection log

Lighting:
• 2 x LED-AS integrated in the bulkhead
• 2 x rotating beacons on the FH cab roof
• 2 x flash beacons in the engine hood
• 2 x LEDs at the rear underbody left and right, arrangement to be agreed upon
• 4 x LED-AS, 2 left and 2 right under the body in the B

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.