Vollmer CHHF 21 H - لأسنان الكربيدVolmer
CHHF 21H
Vollmer CHHF 21 H - لأسنان الكربيد
Volmer
CHHF 21H
سعر ثابت دون ضريبة القيمة المضافة
٢٬٦٩٠ €
سنة الصنع
١٩٨٩
الحالة
مستعمل
الموقع
66140 Malax, Finnland 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- Vollmer CHHF 21 H - لأسنان الكربيد
- المصنّع:
- Volmer
- الموديل:
- CHHF 21H
- سنة الصنع:
- ١٩٨٩
- الحالة:
- جيد جدًا (مستعمل)
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٢٬٦٩٠ €
- الموقع:
- Paxalvägen 39, 66140 Övermalax, FI
اتصل
تفاصيل العرض
- معرّف القائمة:
- A7978790
- التحديث الأخير:
- في ٢٨.٠١.٢٠٢٥
الوصف
Vollmer CHHF 21 H – machine for single-sided grinding
year 1989
S/N 907
Manufacture Vollmer Germany
in good working condition
Ksdpfxeixt Hho Abxsdu
Technical data of the CHHF 21H at a glance:
Circular saw blades
Outside diameter 80 to 700 mm
Bore diameter 20 to 105 mm
Tooth pitch from 8 mm
Hook angle to 30 °
Radial clearance angle -7° to +3 °
Tangential clearance angle to 5 °
Connected load appr. 0.52 kW
Weight appr. 85 kg
Dimensions 70 x 50 x 80 cm
This machine was designed especially for the repair of
missing carbide teeth. Newly inserted tips are ground in
alignment with the existing teeth.
With this table-top version, VOLLMER is offering
a particularly economical,space-saving solution. The
CHHF 21 H uses the wet grinding technique.
During the grinding process,the grinding unit is moved
manually over the tooth, flanks, the saw blade being
positioned by hand against a fixed stop.
The next tooth and then all the remaining teeth
can be ground until the required tooth flank dimension is
achieved.
year 1989
S/N 907
Manufacture Vollmer Germany
in good working condition
Ksdpfxeixt Hho Abxsdu
Technical data of the CHHF 21H at a glance:
Circular saw blades
Outside diameter 80 to 700 mm
Bore diameter 20 to 105 mm
Tooth pitch from 8 mm
Hook angle to 30 °
Radial clearance angle -7° to +3 °
Tangential clearance angle to 5 °
Connected load appr. 0.52 kW
Weight appr. 85 kg
Dimensions 70 x 50 x 80 cm
This machine was designed especially for the repair of
missing carbide teeth. Newly inserted tips are ground in
alignment with the existing teeth.
With this table-top version, VOLLMER is offering
a particularly economical,space-saving solution. The
CHHF 21 H uses the wet grinding technique.
During the grinding process,the grinding unit is moved
manually over the tooth, flanks, the saw blade being
positioned by hand against a fixed stop.
The next tooth and then all the remaining teeth
can be ground until the required tooth flank dimension is
achieved.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2007
تقديم الطلب
الهاتف & فاكس
+49 176 6... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ