يوني ساين يونيبورت 6000Unisign
uniport 6000
يوني ساين يونيبورت 6000
Unisign
uniport 6000
سنة الصنع
٢٠١٠
الحالة
مستعمل
الموقع
ألمانيا 

البيانات الأساسية
- اسم الماكينة:
- يوني ساين يونيبورت 6000
- الشركة المصنعة:
- Unisign
- طراز:
- uniport 6000
- سنة الصنع:
- ٢٠١٠
- الحالة:
- جاهز للاستخدام (مستعمل)
- ساعات التشغيل:
- ٥٥٬٠٠٠ h
السعر والموقع
- الموقع:
- , ألمانيا

اتصل
تفاصيل فنية
محاور
قدرة محرك المغزل:
٣٦٬٠٠٠ واط
أقصى سرعة للمغزل:
٦٬٠٠٠ دورة/دقيقة
مواصفات المحور
مسافة الحركة محور X:
١٠٬٠٠٠ مم
مسافة الحركة لمحور Y:
١٬٥٠٠ مم
مسافة الحركة لمحور Z:
١٬٠٠٠ مم
مزيد من التفاصيل
مصنع وحدات التحكم:
SIEMENS
طراز وحدة التحكم:
Sinumerik 840 D
عدد المحاور:
٣
تفاصيل العرض
- معرّف الإعلان:
- A21719178
- رقم المرجع:
- DE-MIL-UNI-2010-00001
- تحديث:
- آخر مرة في 15.04.2026
وصف
This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.
• Space requirement: approx. 12 x 11 m
• Passage: height 1,000 mm / width 1,500 mm
Itodpfx Aoy A Ifmjm Ajp
• Max torque: 720 Nm
• Gearbox: 2-stage, ratio 1:4
• Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min
• Construction: Gantry design with movable portal bridge and stationary clamping table
• Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted)
• Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head)
• Operation mode: Pendulum machining capability
• Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet
• Coolant system: Operated dry; pre-fitted/ready for coolant use
• Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023
• Installation: Machine recessed and anchored in a foundation pit
Additional equipment
• Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit
• Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe
• Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit
• 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture
• Chip conveyor: Hinged belt type
• Safety fence with Sick light grids
• Makrolon curtains on both sides of the bridge (motorized height adjustment)
• Separation wall with viewing window
• Setup and leveling elements
• Diverse spare parts
• Documentation included
Technical Specification
Taper Size SK 50
• Space requirement: approx. 12 x 11 m
• Passage: height 1,000 mm / width 1,500 mm
Itodpfx Aoy A Ifmjm Ajp
• Max torque: 720 Nm
• Gearbox: 2-stage, ratio 1:4
• Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min
• Construction: Gantry design with movable portal bridge and stationary clamping table
• Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted)
• Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head)
• Operation mode: Pendulum machining capability
• Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet
• Coolant system: Operated dry; pre-fitted/ready for coolant use
• Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023
• Installation: Machine recessed and anchored in a foundation pit
Additional equipment
• Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit
• Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe
• Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit
• 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture
• Chip conveyor: Hinged belt type
• Safety fence with Sick light grids
• Makrolon curtains on both sides of the bridge (motorized height adjustment)
• Separation wall with viewing window
• Setup and leveling elements
• Diverse spare parts
• Documentation included
Technical Specification
Taper Size SK 50
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Unterschleißheim
٢٬٩١٣ km
آلة طحن تروس
KAPPKX160Twin
KAPPKX160Twin
ناجح
تم إرسال رسالتك.
إعلان صغير
Hamburg
٣٬٤٢٤ km
مولد الطوارئ
Newpower Generator Doosan MotorNWK330 Stromerzeuger Notstromaggregat
Newpower Generator Doosan MotorNWK330 Stromerzeuger Notstromaggregat
ناجح
تم إرسال رسالتك.
إعلان صغير
Bremen
٣٬٤٤٣ km
مركز بالقطع - عمودي
MAZAKVTC-300 C II
MAZAKVTC-300 C II
ناجح
تم إرسال رسالتك.
إعلان صغير
București
٢٬٠٠٧ km
آلة طحن الارشادية
WMWSFBZ 2200/6000
WMWSFBZ 2200/6000
ناجح
تم إرسال رسالتك.
إعلان صغير
Dorsten
٣٬٤١٢ km
آلة طحن السرير - عالمية
ANAYAKVH plus 2000
ANAYAKVH plus 2000
ناجح
تم إرسال رسالتك.
إعلان صغير
Nashik
٤٬٤٣٠ km
مركز التصنيع العالمي
MazakVARIAXIS 500-5X
MazakVARIAXIS 500-5X
ناجح
تم إرسال رسالتك.
إعلان صغير
Burgos
٣٬٥٧١ km
ماكينة تفريز بخمسة محاور
CorreaFP40/40
CorreaFP40/40
ناجح
تم إرسال رسالتك.
إعلان صغير
Werlte
٣٬٤٧٦ km
مخرطة CNC
OkumaLB3000 EX II MYW 800
OkumaLB3000 EX II MYW 800
ناجح
تم إرسال رسالتك.
إعلان صغير
Rowley Regis
٣٬٩٤٩ km
ماكينة تجليخ سطحية
PERFECTPFG-70150AHRD Surface Grinding Machine
PERFECTPFG-70150AHRD Surface Grinding Machine
ناجح
تم إرسال رسالتك.
إعلان صغير
Dötlingen
٣٬٤٥١ km
ماكينة تفريز CNC ذات 5 محاور مع 24 أداة
COSMEC 5-Achsen CNC-FräseCONQUEST 515
COSMEC 5-Achsen CNC-FräseCONQUEST 515
تم حذف إعلانك بنجاح
حدث خطأ





















































































































