ماكينة ثني الأنابيب، ماكينة الثني CNC

transfluid Maschinenbau GmbH DB 625-CNC-VE

Tube bending machine, CNC bending machine, tube bender, tube bending system, tube processing, tube technology, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine

Capacity:
- Round tubing mild steel 25 x 2,5 mm Ø
- Round tubing stainless steel 25 x 2,0 mm Ø
- Bending speed 125°/sec (forward feed)
- Feed speed 1,800 mm/sec
- Rotational positioning speed 300°/sec
- Repeatability bending axis ±0.1°
- Repeatability length ±0.1 mm
- Repeatability rotation ±0.1°
- Tube insertion length / usable length for mandrel bending 2000 mm
- Maximum radius range 125 mm
- Bending height 1,050 mm

Machine equipment / basic equipment:
- Free-standing bending head, 850 mm long
- The compact free-standing bending head allows tube processing with a clear spacing of 300 mm
between two bends
- Bending axis drive: servo-electric
- Bending direction: clockwise
- With hollow shaft to achieve small radii
- Following pressure die with retraction via pneumatic cylinder and ball circulation guides,
350 mm following, with a constant tube support of 100 mm
- Pneumatic retraction is fixed and can be released if needed (e.g., for aluminum)
- Pressure die can open widely so that the rotation unit with the long-neck chuck can move right up
to the bending tool
- With floor scanning of the safety area using a laser scanner
- Safety area can be adapted to spatial conditions via software
- Additionally, the machine is built according to the latest safety standards and complies with CE
regulations
- The front area of the enclosure is open and secured by the machine’s own laser scanner
- With automatic mandrel lubrication
- Standardized hydraulic components
- Machine stationary
- Color: RAL 7037 dust grey, RAL 3000 red

Machine data:
- Nominal pressure 250 bar, operating pressure 200 bar
- Operating voltage 400 Volt – 50 Hz – 3-phase
- Control voltage 24 Volt DC
- Length 3800 mm
- Width ,400 mm
- Height 1300 mm

Control description:
- 3-axis control for bending angle, length feed, and rotational positioning for multi-level bending
-The control system operates with three individual axes: bending, rotational positioning, and length
positioning. Tolerance checks are performed automatically, and further movements are released
accordingly
- Built-in computer – IBM compatible, min. Celeron 600
CD-ROM, 3.5" drive 1.44 MB
- 2 serial and 1 parallel interface
- Installed in a 19" rack enclosure
- With 15" monitor and keyboard
- During processing, a continuous target/actual value comparison is shown on the monitor
- User interface: Windows

CNC control standard equipment:
- Programming of up to 20 different positions on one tube
- 1 GB storage capacity for approx. 100.000 tubes, each with 20 different axis positions
- Tube data can be saved after entry
Gbjdpfx Abowzan Rsxju
- Archiving of drawing numbers according to Windows standard
- Errors and operator faults detected by the control are displayed in plain text