ماكينة نفخ القوالب

TECHNE 4000TWIN

Used TECHNE 4000TWIN HDPE Blow Molding Machine up to 1805 bph


Technical Parameters and Features of the HDPE Blow Molding Machine TECHNE


The HDPE Blow Molding Machine TECHNE is equipped with a double station and eight cavities (4+4) and a center distance of 102.5 mm. The used TECHNE 4000TWIN blow molding machine specifically processes HDPE (High-Density Polyethylene) in a single-layer configuration. Furthermore, the machine efficiently produces up to 1805 bph (bottles per hour). Demonstrating a 94% efficiency rate as verified by the FAT parameter.


Production and Efficiency


This HDPE Blow Molding Machine TECHNE cycles through production in approximately 15 seconds. It is subject to a +/- 1% variation. Moreover, it consistently produces around 43,320 bpd (bottles per day). Allowing for a +/- 5% fluctuation. Additionally, a 59 kW DC motor powers its extruder, which has an 80 mm/25D diameter and supports an HDPE output of roughly 160 kg/h.


Additional Technical Details


The Used HDPE Blow Molding Machine TECHNE 4000TWIN up to 1805 bph requires a total power installation of 157 kWh and consumes an average of 63 kWh. Consequently, a hydraulic system exerts a clamping force of 135 kN on the mold, controlling the blow pins, clamping, and carriage movements through proportional valves. In addition, levers and a strategically positioned hydraulic actuator facilitate mold closing. Optimizing the diffusion of clamping force across the mold-holder plates.


Control and Automation of the HDPE Blow Molding Machine TECHNE

Lasdovgvpcspfx Abxeh

Operators can regulate and monitor machine of the HDPE Blow Molding Machine TECHNE operations through a Microset Moog control panel, ensuring precision and ease of setup. Similarly, the parison cutting system employs linear cold blades. Meanwhile, a pneumatic pick and place system automatically removes bottles. Also, a single cylinder controls the parison thickness in a closed loop, offering weight control and independent profile adjustments for each head via screen monitoring. Importantly, a single pneumatic actuator performs both upper and lower deflashing.


Power Supply and Year of Manufacture


Built in 1999, the machine operates on a 400 Volt, 50 Hz, three-phase power supply, facilitating smooth integration with existing industrial setups. Therefore, the TECHNE 4000TWIN stands out as a durable and effective choice for professionals in the bottling industry seeking a high-performance solution for processing HDPE containers. Ultimately, this machine represents a reliable and cost-effective investment in manufacturing efficiency.


Optional Accessories:




Grinders for scraps TRIA mod. BM 5030 S


Linear conveyors for scraps


Angled conveyors for scraps


MOTAN complete feeding system for machine mod. 4000TWIN


Leak testers for machine 4000TWIN


Conveyors group and parts for bottles receiving and moving


Chiller Industrial Frigo mod. GR1AC160


Air compressor Atlas Copco mod. GA 75 VSD+ FF 8153 3258 35