مقطورة نصف قلابةSTAS
OP 10.60 52m³
مقطورة نصف قلابة
STAS
OP 10.60 52m³
سعر ثابت دون ضريبة القيمة المضافة
١٠٬٨٧٠ €
الحالة
مستعمل
الموقع
Korschenbroich-Glehn 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
١٠٬٨٧٠ €
- موقع البائع:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, ألمانيا

اتصل
تفاصيل فنية
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- ٠٧/٢٠٠٠
- طول مساحة التحميل:
- ١٠٬٦٠٠ مم
- عرض مساحة التحميل:
- ٢٬٤٨٠ مم
- ارتفاع مساحة التحميل:
- ٢٬٠٠٠ مم
- حجم مساحة التحميل:
- ٥٢ م³
تفاصيل العرض
- معرّف القائمة:
- A20722547
- التحديث الأخير:
- في ١٠.١٢.٢٠٢٥
الوصف
TÜV new!
Chassis
Dwsdpfxjx Ep Nxe Aflef
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Chassis
Dwsdpfxjx Ep Nxe Aflef
In aluminium
Two fully automatic welded I-beams with welded cross members.
Chassis width 1,200 mm
Axles and suspension drum brakes
BPW/SAF axle units 3 x 9 t with air suspension, air bellows centrally arranged on the chassis longitudinal member, lift axle with starting aid, load pressure gauge, raising-lowering valve,
Tires and wheels
6 wheels with tires size 385/65 R 22.5 approx. 30-50%? 11.75 & 22.5 ET 0, on aluminum rims
King pin
2" - screwed into a 10 mm thick plate
Landing gear
Mechanical version with one-sided operation in 2 speeds,
for air suspension we use Jost Module,
Brake system
According to E.G. standard, two-line system Wabco, spring-loaded parking brake on two axles and EBS-D system Wabco, ALU air tank
electrical system
According to the guidelines of the STVZO with 2 five-chamber lamps type Aspöck, 24 volt system with a second socket for special operation, taillights in LED design, 3x separate reversing lights
Tipper body / trough
Aluminum trough, side walls 30mm thick plank profiles (2-3 mm) fully welded, floor approx. 8 mm thick wear-resistant alloy? Front wall 4 mm reinforced in straight design, rear wall pendulum flap with LL seal in slanted design with a central grain slider, pendulum flap with pneumatic operation, doors covered at the top, fold-down sideboards left and removable extension sideboard at the back,
Hydraulic system tipping cylinder is new
Hydraulic cylinder mounted on the front wall with a working pressure of 135 bar, make Edbro 18 with approx. 2 m hose and loose half 1",
Accessories
6 PVC mudguards, spare wheel holder, side underrun protection, toolbox, 3 m aluminum ladder, aluminum swing roof with rolling tarp system and catwalk on the trough? Tarpaulin closure
sideways with tension belts, 2 aluminium swing bows, foldable underrun protection in aluminium, separate discharge funnel with tarpaulin bag attached to the side of the frame, holder for shovel, broom and
scraper, etc...
Offer and pictures are non-binding.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2002
تقديم الطلب
الهاتف & فاكس
+49 2182 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




















