شبه مقطورة بأرضية متحركة

STAS 13.50 "WF 87 Farmstar"

Chassis
Manufactured using a self-supporting aluminum design with appropriate reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brakes 22.5", Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with start-assist function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension.
Ljdpfx Ajgcw Risbpohh

Tires and Wheels
6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg).

Kingpin
Aluminum landing gear, manufacturer: Alu-Leg, 2 x 10 tons support load, swivel feet used for air suspension.

Braking System
According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator.

Electrical System
According to STVZO guidelines with 2 five-chamber lights, type Aspöck Europoint III, integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side outline lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the kingpin, 1 LED work light inside at the front left, operable from the outside.

Body/Container "Body fully welded inside"
Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum container, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick with 4 swivel rod locks, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar liner" for complete unloading, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with folding cover plate in the floor closure, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, i.e. 2 pieces, service door on the left in the front wall.

Hydraulic System "Cargo Floor" 24 plank system - smooth design!
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded in the floor, actuation at the rear left with cable operation in a lockable, waterproof box, or hydraulic hoses.

Accessories
PVC mudguards with rubber splash guards, aluminu

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.