وحدة تبريد درجة الحرارة (TCU)

Single Easitemp 95/6/45 (Easi95.A)

*Technical Specification:
device type: 6/95
heating capacity: 6 kW
cooling capacity: 45 kW
Medium: water up to 95°C
maximum external volume: 50 ltr at 95°C

*Equipment hydraulic:
- Cooling and filling controlled by solenoid valve
- Automatic from cooling water or manual filling (at filling nozzle/option)
- Level monitoring by magnet float-switch
- Dirt trap in from process line of circulating system and cooling water inlet
- Pump reversing for leak-stop operation
- Manual mould draining via leak-stop operation and venting by tap at backside of unit
- Filling time monitoring and aquatimer
- Cool down mode (temperature adjustable)
- Adjustable temperature alarm
- Options: filling nozzle, interface cable, mechanical flow metering

*Equipment electrical:
- Controller SBCmini, with relay for collective alarm
230V switchable, on the back of controller on terminal
- Heating control by SSR
- Control cabinet IP54
- Interface 20mA TTY; pinning Arburg
- Cekon plug 16A

*General equipment:
- Corrosion resistant components (stainless stell, brass)
- Heating rod made of Incoloy
- Unit mounted on rolls, two pieces steerable with break
- Additional temperature fuse for safe heating switch-off
by contactor

*Cooling:
Power: 45 kW (stainless steel plate heat exchanger)
Cooling water connection: Socket G3/8" IG
(Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar)

*Pump:
Type: T401
Output rate (max): 40 ltr/min
Pressure (max): 3,8 bar
Motor capacity: 0,5 kW
Construction: submersible pump / peripheral wheel

*Dimensions/Weights/Colours
Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.)
Weight: approx. 30 kg
Colour: Case: RAL 7035 light grey
Pjdpfxjfnvvio Af Uopt
Front door: RAL 5015 sky blue

*Connections:
Circulating medium int. thread G1/2"
Cooling water int. thread G3/8"
Filling (option)

*This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.