SCM PROFISET 60 مسوي رباعي الجوانبSCM
profiset 60
SCM PROFISET 60 مسوي رباعي الجوانب
SCM
profiset 60
سعر ثابت دون ضريبة القيمة المضافة
٢١٬٥٠٠ €
سنة الصنع
٢٠١٤
الحالة
مستعمل
الموقع
Karsin 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- SCM PROFISET 60 مسوي رباعي الجوانب
- المصنّع:
- SCM
- الموديل:
- profiset 60
- سنة الصنع:
- ٢٠١٤
- الحالة:
- شبه جديد (مستعمل)
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٢١٬٥٠٠ €
- الموقع:
- Dworcowa 28, 83-440 Karsin, PL
اتصل
تفاصيل العرض
- معرّف القائمة:
- A7194111
- التحديث الأخير:
- في ٢٩.١١.٢٠٢٤
الوصف
"EASY PLUS" electronic control from the control panel 2 axes:
- Automatic control of the left spindle vertical and horizontal position of the upper spindle.
- Selection of the feed speed.
- 7 "color LCD display
Kdsdpfx Absh Nvt Ujxou
Min.working width (finished size) 25 mm
Working width (finished size) 230 mm
Min.working height (finished size) 6 mm
Working height (finished size) 120 mm
Min. Length of a single element 450 mm
Variable feed speed controlled by an inverter 5 - 25 m / min
Pneumatic pressure of the feed shafts
Top feed shaft in front of the planer
3kW feed motor power
5.5 kW planer motor power
Vertical spindle motor power (single) 11kW
Power of the upper horizontal spindle motor 9kW
Spindle speed 6000 rpm.
Spindle diameter 40 mm
Length of the vertical spindles 140 mm
Length of the horizontal spindles 250 mm
Axial adjustment of the vertical spindles relative to the 40 mm worktable
Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm
Min./max. tool diameter on the planer 120 - 140 mm
Min./max. tool diameter on vertical spindles 100 - 180 mm
Max. Profile on the vertical spindle 40 mm
Min./max. tool diameter on the upper spindle 125 (100-180) mm
Feed shaft diameter 140 mm
Length of the feeding table 2000 mm
Quick adjustment of the table at the entrance and 10 mm ruler
Manual pump for greasing the STD table
- Automatic control of the left spindle vertical and horizontal position of the upper spindle.
- Selection of the feed speed.
- 7 "color LCD display
Kdsdpfx Absh Nvt Ujxou
Min.working width (finished size) 25 mm
Working width (finished size) 230 mm
Min.working height (finished size) 6 mm
Working height (finished size) 120 mm
Min. Length of a single element 450 mm
Variable feed speed controlled by an inverter 5 - 25 m / min
Pneumatic pressure of the feed shafts
Top feed shaft in front of the planer
3kW feed motor power
5.5 kW planer motor power
Vertical spindle motor power (single) 11kW
Power of the upper horizontal spindle motor 9kW
Spindle speed 6000 rpm.
Spindle diameter 40 mm
Length of the vertical spindles 140 mm
Length of the horizontal spindles 250 mm
Axial adjustment of the vertical spindles relative to the 40 mm worktable
Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm
Min./max. tool diameter on the planer 120 - 140 mm
Min./max. tool diameter on vertical spindles 100 - 180 mm
Max. Profile on the vertical spindle 40 mm
Min./max. tool diameter on the upper spindle 125 (100-180) mm
Feed shaft diameter 140 mm
Length of the feeding table 2000 mm
Quick adjustment of the table at the entrance and 10 mm ruler
Manual pump for greasing the STD table
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+48 52 30... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ