آلة الكبس والتجعيدSchechtl
MAF 400/CNC
آلة الكبس والتجعيد
Schechtl
MAF 400/CNC
سنة الصنع
٢٠٢٦
الحالة
جديد
الموقع
Kalina Wielka 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
- الموقع:
- Kalina Wielka 62 E, 32-218 Kalina Wielka, Polska

اتصل
تفاصيل العرض
- معرّف القائمة:
- A20762817
- التحديث الأخير:
- في ١٥.١٢.٢٠٢٥
الوصف
Efficient, quiet, and powerful mechanical machine
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Maximum bending thicknesses:
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
Rbedpox Hyhbefx Ac Hjt
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Technical specifications:
Working length: 4040 mm
Total length: 5352 mm
Depth: 2232 mm
Working height: 950 mm
Total height: 1924 mm
Weight: 5,000 kg
Maximum bending thicknesses:
Steel: 1.5 mm
Aluminum: 2.00 mm
Stainless steel: 1.00 mm
Copper: 2.00 mm
Galvanized sheet: 3.00 mm
Standard equipment:
• 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam
• 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam
• Foot switch (MAF 400/CNC model delivered with a second foot switch)
• Soft start for the bending beam
• Electrically driven back gauge, 8-1000 mm
• 5 m power cable with 32 A mains plug (EU version)
• Supply voltage: 3 x 400 V, 50 Hz (EU version)
CNC S-Touch control:
From profile concept to bending precision in record time
Standard features at no extra charge:
• Graphical display of the bending sequence for the selected program
• Graphical representation of sheet position before every bend
• Operator guidance – each work step visually explained via the graphic control system
• Programming without submenus
• Profile correction by direct touch in the desired section of the profile
• Programmable angle correction
Rbedpox Hyhbefx Ac Hjt
• Set repeat cycles for special radius arcs
• Cutting program for RSL rotary shears
• Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges
• Profile search possible by name, sketch selection, and profile drawing on the touchscreen
• 21.5-inch LCD touchscreen with best-in-class graphics
• USB port for program backup and transfer
• Non-volatile memory for over 3,000 programs
• Freely assignable program names (profile names)
• Registration of produced quantities and machine operating time
• 16 languages
• Remote support (Team Viewer)
• Soft start for bending beam
• Back gauge with drive, 6-1000 mm
• Foot switch
For EU market:
• 16 A plug with 5 m power cable
• For MAF and MAZ models, 32 A plug with 5 m power cable
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2023
تقديم الطلب
الهاتف & فاكس
+48 667 6... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Wasbek
٣٬٤٨٢ km
آلة الثني الدوّارة - SBS 1020/2,5
KnuthSBS 1020/2,5
KnuthSBS 1020/2,5
إعلان صغير
Velen
٣٬٤٣١ km
التشفيه والتماس المتداول آلة
OSTASKMRP-1,2
OSTASKMRP-1,2
إعلان صغير
Eislingen/Fils
٣٬٠٤١ km
قسم القص-جنبا إلى جنب
PEDDINGHAUS210/13
PEDDINGHAUS210/13
إعلان صغير
Velen
٣٬٤٣١ km
آلة الديكور والتشفيه
WMTRM 8
WMTRM 8
إعلان صغير
Vilniaus miesto savivaldybė
٣٬١٤٣ km
آلة ثني الصفائح المعدنية
SchröderMAKU 3200
SchröderMAKU 3200
إعلان صغير
Kalina Wielka
٢٬٧٧٥ km
آلة العقص والتشفيه
SchechtlMBM 310 ETC
SchechtlMBM 310 ETC
إعلان صغير
Trittau
٣٬٤٢٤ km
آلة ثني الصفائح المعدنية
SchechtlMAX 200 / STD
SchechtlMAX 200 / STD
إعلان صغير
Güntersleben
٣٬١٢٥ km
المقصات ومقعد قابل للطي
SchechtlHT KS 150
SchechtlHT KS 150
إعلان صغير
Heilbronn
٣٬١٠١ km
مقعد قابل للطي ، آلة ثني ، مقعد قابل للطي
PROD-MASZ Abkantbank24 BiegemaschineProfi Abkantbank RED-3m/0.8 +Aussparung
PROD-MASZ Abkantbank24 BiegemaschineProfi Abkantbank RED-3m/0.8 +Aussparung
إعلان صغير
Wellingborough
٣٬٨٦٢ km
آلة ثني الصفائح المعدنية
SCHRODERPOWERBEND PROFESSIONAL 3200/3.0
SCHRODERPOWERBEND PROFESSIONAL 3200/3.0
تم حذف إعلانك بنجاح
حدث خطأ













































































