فرن صناعيSAT
فرن صناعي
SAT
السعر الافتتاحي دون ضريبة القيمة المضافة
١٥٬٠٠٠ €
سنة الصنع
٢٠١٤
الحالة
مستعمل
الموقع
Bron 

عرض الصور
عرض الخريطة
السعر والموقع
السعر الافتتاحي دون ضريبة القيمة المضافة
١٥٬٠٠٠ €
- الموقع:
- 35 Ave de la République, 69500 Bron, France

اتصل
تفاصيل العرض
- معرّف القائمة:
- A20683210
- التحديث الأخير:
- في ٠٥.١٢.٢٠٢٥
الوصف
Offer Plan: No. A8 28 441
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Casdpfx Afjx Dhrmsloa
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm
Working temperature: 380 to 420°C.
Maximum operating temperature: 450°C / air.
TEMPERATURE HOMOGENEITY
Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm
Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient.
FLOOR
Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer).
ACCESS DOOR TO THE INTERNAL VOLUME
Number of doors: 1
Type: double-leaf, hinged on the right.
DOOR SEAL
Refractory fiber gasket.
VENTILATION
Horizontal air circulation.
Number of units: 2.
Type: centrifugal fan.
Construction: mild steel.
Individual air flow: 6,600 m³/h.
Drive motor: brand A.B.B. or LEROY SOMER.
HEATING
Casdpfx Afjx Dhrmsloa
Type: natural gas with combustion gas recirculation.
Total power: 90 kW.
Number of heating zones: 1
Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard.
TEMPERATURE CONTROL
Number of controlled zones: 1.
Controller: EUROTHERM microprocessor-based PID controller.
Safety: Torque break safety device.
Relay output for contactor control.
Cabinet equipment includes:
- main switch
- multiposition switches to prevent incorrect operation during start-up
- transformer for control circuits
- fuses for power and control circuits
- contactors for the heating system
- circuit breakers and contactors for motor control
- panel switches
- indicator lights
- control and regulation instruments
- CE marking will be affixed to the machine (subject to compliance with safety instructions)
- A certificate of conformity or incorporation will be supplied by SAT.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2017
تقديم الطلب
الهاتف & فاكس
+33 6 16 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ

