200 لتر مع تحضير وسائل التفجيرSAPI GMBH Rücksaug - Strahlgeräte
Druck-Sandstrahlgerät
200 لتر مع تحضير وسائل التفجير
SAPI GMBH Rücksaug - Strahlgeräte
Druck-Sandstrahlgerät
سعر ثابت دون ضريبة القيمة المضافة
١٣٬٩٥٠ €
سنة الصنع
٢٠٢٥
الحالة
جديد
الموقع
Möttingen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
١٣٬٩٥٠ €
- الموقع:
- Enkinger Weg 4, 86753 Möttingen, DE
اتصل
تفاصيل فنية
- قدرة:
- ٥ كيلوواط (٦٫٨٠ حصان)
تفاصيل العرض
- معرّف القائمة:
- A18968651
- التحديث الأخير:
- في ١٧.٠٤.٢٠٢٥
الوصف
SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling.
Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment.
The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve.
The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse.
Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package.
Hfjdpfewc Rcnjx Abxjn
This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling.
The scope of delivery includes:
SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar
High-performance 1 1/4" water separator, permanently installed on the unit
SAPI safety shut-off device
Cyclone cleaner for abrasive preparation with lifting device
Abrasive sieve (inserted sieve in the blast pot hopper)
Filling hopper 500x500x380 mm
4-meter connecting hose from the filling hopper to the cyclone cleaner
3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner
Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container
10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling
Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment.
The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve.
The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse.
Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package.
Hfjdpfewc Rcnjx Abxjn
This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling.
The scope of delivery includes:
SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar
High-performance 1 1/4" water separator, permanently installed on the unit
SAPI safety shut-off device
Cyclone cleaner for abrasive preparation with lifting device
Abrasive sieve (inserted sieve in the blast pot hopper)
Filling hopper 500x500x380 mm
4-meter connecting hose from the filling hopper to the cyclone cleaner
3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner
Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container
10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling
Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2022
تقديم الطلب
الهاتف & فاكس
+49 9083 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ