SAF بلازما تون 25 حصانSAF
Plasmatone 25Hp
SAF بلازما تون 25 حصان
SAF
Plasmatone 25Hp
سنة الصنع
٢٠٠١
الحالة
مستعمل
الموقع
ألمانيا 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- SAF بلازما تون 25 حصان
- الشركة المصنعة:
- SAF
- طراز:
- Plasmatone 25Hp
- سنة الصنع:
- ٢٠٠١
- الحالة:
- جاهز للاستخدام (مستعمل)
- ساعات التشغيل:
- ١٬٩٠٧ h
السعر والموقع
- الموقع:
- , ألمانيا

اتصل
تفاصيل فنية
- مسافة الحركة محور X:
- ٣٬٤٠٠ مم
- مسافة الحركة لمحور Y:
- ١٬٧٠٠ مم
- مسافة الحركة لمحور Z:
- ٢٩٠ مم
- عدد المحاور:
- ٣
تفاصيل العرض
- معرّف الإعلان:
- A21534423
- رقم المرجع:
- DE-CUT-SAF-2001-00001
- تحديث:
- آخر مرة في ١٨.٠٣.٢٠٢٦
وصف
This 3-axis SAF Plasmatone 25Hp was manufactured in 2001. It features an 8000 x 2500 mm cutting table with a maximum X-axis travel of 3400 mm and Y-axis travel of 1700 mm. The machine is retrofitted with a Hypertherm Max Pro-200 power source, allowing for versatile cutting of various materials. If you are looking to get high-quality plasma cutting capabilities, consider the SAF Plasmatone 25Hp machine we have for sale. Contact us for further details.
Iaedpfeyvg A Dex Ahvjp
• Cutting table: 8000 x 2500 mm
• Retrofitted power source: Hypertherm Max Pro-200 (year 2013), long-life plasma (air and oxygen)
• Cutting capability:
• Mild steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start
• Stainless steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start
• Aluminum (air/air): 0.5–30 mm full cut, up to 40 mm with edge start
• Oxygen can be used depending on required cut quality
• Cutting current settings: 50 A / 130 A / 200 A (consumables changeable at the torch)
• CNC control: new-generation control with Mach3 software
Additional equipment
• SAF fume extraction system with 11 kW motor and 12-filter unit
• Automatic extraction air dampers on the frame (electric sensors + pneumatic cylinders)
• New cutting head and a set of consumables included
Iaedpfeyvg A Dex Ahvjp
• Cutting table: 8000 x 2500 mm
• Retrofitted power source: Hypertherm Max Pro-200 (year 2013), long-life plasma (air and oxygen)
• Cutting capability:
• Mild steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start
• Stainless steel (air/air): 0.5–30 mm full cut, up to 50 mm with edge start
• Aluminum (air/air): 0.5–30 mm full cut, up to 40 mm with edge start
• Oxygen can be used depending on required cut quality
• Cutting current settings: 50 A / 130 A / 200 A (consumables changeable at the torch)
• CNC control: new-generation control with Mach3 software
Additional equipment
• SAF fume extraction system with 11 kW motor and 12-filter unit
• Automatic extraction air dampers on the frame (electric sensors + pneumatic cylinders)
• New cutting head and a set of consumables included
تم حذف إعلانك بنجاح
حدث خطأ
























































