غرفة درجة الحرارةRS-Simulatoren
TS1000/70-10K
غرفة درجة الحرارة
RS-Simulatoren
TS1000/70-10K
الحالة
مستعمل
الموقع
Borken 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
- الموقع:
- Einsteinstraße 8a, 46325 Borken, DE
اتصل
تفاصيل العرض
- معرّف القائمة:
- A18745376
- الرقم المرجعي:
- 15825
- التحديث الأخير:
- في ١٨.٠٣.٢٠٢٥
الوصف
RS Simulators
Water-cooled temperature test chamber
New generation rod program controller (SE-702 with touch panel and data logger for measurement recording)
Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced
The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel
(Pure RMS housing, NO shaker included!)
The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This
facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a
Dcsdpfx Agev Rcbaoqen
duct in the base plate of the RMS substructure.
The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase
(commonly found in electronics tests) Application)
Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm
Temperature range: -70°C to +180°C
Current consumption: approx. 100 A
Total power: approx. 50 kVA
Cooling and heating capacity: 10 K/min
Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!!
Type: TS1000/70-10K
For your safety, please note the following information!
The following steps are carried out on our offered chambers in advance:
1. Functional testing and replacement of necessary components
2. Refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment.
Condition: Used
Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Water-cooled temperature test chamber
New generation rod program controller (SE-702 with touch panel and data logger for measurement recording)
Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced
The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel
(Pure RMS housing, NO shaker included!)
The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This
facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a
Dcsdpfx Agev Rcbaoqen
duct in the base plate of the RMS substructure.
The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase
(commonly found in electronics tests) Application)
Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm
Temperature range: -70°C to +180°C
Current consumption: approx. 100 A
Total power: approx. 50 kVA
Cooling and heating capacity: 10 K/min
Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!!
Type: TS1000/70-10K
For your safety, please note the following information!
The following steps are carried out on our offered chambers in advance:
1. Functional testing and replacement of necessary components
2. Refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment.
Condition: Used
Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker)
(Subject to change and errors in the technical specifications, information is subject to change!)
We are happy to answer any further questions you may have over the phone.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
تقديم الطلب
الهاتف & فاكس
+49 2861 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ