آلة تعبئة الأنبوب وآلة وضع العلامات على الأنبوبRigao Machinery Corp.
Tube Labeller/Filler and Sealer
آلة تعبئة الأنبوب وآلة وضع العلامات على الأنبوب
Rigao Machinery Corp.
Tube Labeller/Filler and Sealer
EXW السعر الافتتاحي دون ضريبة القيمة المضافة
٥٣٬٢٥٠ €
سنة الصنع
٢٠٢١
الحالة
مستعمل
الموقع
Crewe 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- المصنّع:
- Rigao Machinery Corp.
- الموديل:
- Tube Labeller/Filler and Sealer
- سنة الصنع:
- ٢٠٢١
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٨ h
السعر والموقع
EXW السعر الافتتاحي دون ضريبة القيمة المضافة
٥٣٬٢٥٠ €
- الموقع:
- Crewe, المملكة المتحدة

اتصل
تفاصيل فنية
- نوع تيار الإدخال:
- ثلاثي الطور
تفاصيل العرض
- معرّف القائمة:
- A16460031
- التحديث الأخير:
- في ١٥.٠٧.٢٠٢٤
الوصف
2011 Rigao Machinery Corp Plastic/PE/Laminated Tube Labeller and Tube Filler & Sealer with Cooler
This machine is in "as new " condition only running a few thousand tubes for commissioning. It was purchased for a specific purpose, which did not materialise. The system can be run separately (labeller and Filler/Sealer) or as one continuous line. Comes with original tool kit, spares and the option of a 12 month warranty through a UK Based Rigao Specialist. This same company could potentially commision the machine if required (price on application).
Plastic/PE/Laminated Tube Filler and Sealer with Cooler
○ The machine is used to fill and seal plastic tube, capable of tube loading, tube code registering, filling, hot air sealing, code printing, trimming and feeding off line a finished tube.
○ Machine contacting parts are made of 316L stainless steel which is clean and sanitary.
○ With a built in safety device, the machine will be shut down if the door is open. There is also an overload protection provided.
Parameter
Filling volume 5-250ml(by changing different filling system)
Filling accuracy ≤±1%
Capacity 1800-2400pcs/hour (Depend on tube size and product viscosity)
Tube diameter ф13-50mm (by changing tube tooling – 35, 40 & 50mm tooling available).
Njdpfxst Ami Us Abkodd
Tube length 210mm (Max. Length)
Hopper volume 40 L
Power 380V /50Hz 3Phase
Air pressure 0.5-0.7MPa
Equipped motor 1.1 Kw
Plastic/PE/Laminated Tube Labeller with Auto Feeder
Tube size: Φ20-50mm,Length: 20-240mm
Mandrel sizes: Φ35mm, Φ50mm
Labelling speed: 60-100 tubes/minute(vary with tube and label size)
Labelling accuracy: ±0.5mm(excluding tube or label difference)
Label size: ID: Φ75mm; OD: Φ300mm; Width: 170mm
Compressed air: 0.4-0.7Mpa,3L/min.
Power supply: 220VAC±5% 50/60Hz 1.2Kw
Machine dimension: (L)2,252×(W)1,350×(H)1,875
Configuration list:
S6120 servo label out Japan Yaskawa
Label detecting eye Japan Keyence
Tube detecting eye Japan Keyence
Label roller motor transmission Japan Panasonic
Stuck tube clearing device Japan Panasonic
High precision CAM divider Taiwan RU80DF
Pressure roller wheel device Japan Panasonic
PLC control system Germany Siemens
Touch screen Taiwan Weinview
This machine is in "as new " condition only running a few thousand tubes for commissioning. It was purchased for a specific purpose, which did not materialise. The system can be run separately (labeller and Filler/Sealer) or as one continuous line. Comes with original tool kit, spares and the option of a 12 month warranty through a UK Based Rigao Specialist. This same company could potentially commision the machine if required (price on application).
Plastic/PE/Laminated Tube Filler and Sealer with Cooler
○ The machine is used to fill and seal plastic tube, capable of tube loading, tube code registering, filling, hot air sealing, code printing, trimming and feeding off line a finished tube.
○ Machine contacting parts are made of 316L stainless steel which is clean and sanitary.
○ With a built in safety device, the machine will be shut down if the door is open. There is also an overload protection provided.
Parameter
Filling volume 5-250ml(by changing different filling system)
Filling accuracy ≤±1%
Capacity 1800-2400pcs/hour (Depend on tube size and product viscosity)
Tube diameter ф13-50mm (by changing tube tooling – 35, 40 & 50mm tooling available).
Njdpfxst Ami Us Abkodd
Tube length 210mm (Max. Length)
Hopper volume 40 L
Power 380V /50Hz 3Phase
Air pressure 0.5-0.7MPa
Equipped motor 1.1 Kw
Plastic/PE/Laminated Tube Labeller with Auto Feeder
Tube size: Φ20-50mm,Length: 20-240mm
Mandrel sizes: Φ35mm, Φ50mm
Labelling speed: 60-100 tubes/minute(vary with tube and label size)
Labelling accuracy: ±0.5mm(excluding tube or label difference)
Label size: ID: Φ75mm; OD: Φ300mm; Width: 170mm
Compressed air: 0.4-0.7Mpa,3L/min.
Power supply: 220VAC±5% 50/60Hz 1.2Kw
Machine dimension: (L)2,252×(W)1,350×(H)1,875
Configuration list:
S6120 servo label out Japan Yaskawa
Label detecting eye Japan Keyence
Tube detecting eye Japan Keyence
Label roller motor transmission Japan Panasonic
Stuck tube clearing device Japan Panasonic
High precision CAM divider Taiwan RU80DF
Pressure roller wheel device Japan Panasonic
PLC control system Germany Siemens
Touch screen Taiwan Weinview
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2024
تقديم الطلب
الهاتف & فاكس
+44 1270 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Jonava
٣٬١٩١ km
آلة الفرشاة
WOODLAND MACHINERY1000-2S
WOODLAND MACHINERY1000-2S
إعلان صغير
Gifhorn
٣٬٣١٧ km
آلة تعبئة الأكواب 2400 من هامبا
Hamba2400
Hamba2400
إعلان صغير
Ystad
٣٬٤٦٨ km
صواني
MultivacT-800
MultivacT-800
إعلان صغير
Ystad
٣٬٤٦٨ km
الملفات والسلخ
Baader185
Baader185
إعلان صغير
Rīga
٣٬٣٩٠ km
مخلل الملفوف ، السلطة ، الكيمتشي
Alistar EuropeSK1200
Alistar EuropeSK1200
إعلان صغير
Ystad
٣٬٤٦٨ km
مُشكِّل حراري
MultivacR-530
MultivacR-530
إعلان صغير
Ystad
٣٬٤٦٨ km
التعبئة والتغليف
REEPAKREEFLOW 250
REEPAKREEFLOW 250
إعلان صغير
Hobro
٣٬٧١٦ km
كأس حشو
GastiDogatherm 41
GastiDogatherm 41
إعلان صغير
Skopje
١٬٨٩٤ km
فاصل
Westfalia SeparatorSA 45-36
Westfalia SeparatorSA 45-36
إعلان صغير
Veliko Tarnovo
١٬٨٦٩ km
صواني
SEALPAC800
SEALPAC800
تم حذف إعلانك بنجاح
حدث خطأ






































































































