قطع متقاطع هوائي DMDK 35 REMA RESZELREMA
DMDK-35
قطع متقاطع هوائي DMDK 35 REMA RESZEL
REMA
DMDK-35
سنة الصنع
١٩٩٨
الحالة
مستعمل
الموقع
Kłodawa 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- قطع متقاطع هوائي DMDK 35 REMA RESZEL
- المصنّع:
- REMA
- الموديل:
- DMDK-35
- سنة الصنع:
- ١٩٩٨
- الحالة:
- تمت صيانته في الورشة (مستعمل)
السعر والموقع
- الموقع:
- Gorzowska 8, 66-415 Kłodawa, PL
اتصل
تفاصيل العرض
- معرّف القائمة:
- A16502336
- التحديث الأخير:
- في ١٢.٠٧.٢٠٢٤
الوصف
machine overhauled, major overhaul
- year of production 1998
TECHNICAL PARAMETERS:
diameter of the main saw ⌀ 350 mm
max. sawing height 70 mm
max. sawing width 150 mm
engine power 3 kW
rotational speed of the spindle 4500 rpm
diameter of spindle tip ⌀ 30 mm
nominal pressure of compressed air 0,6 Mpa
frequency of working cycles 0 - 28 cycles/min
max. stroke of saw 100 mm
connection diameter of suction nozzle 1 x ⌀ 125 mm
air demand (in dust extraction system) 1300 m3/h
height to table surface 850 mm
weight 160 kg
The DMDK-35 circular saw is used for transverse sawing of wood.
The maximum cutting width is 220 mm with a height of 35 mm.
The saw is controlled by a foot switch.
The saw guard assembly is equipped with safety curtains.
The material is pressed with two point presses.
This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min.
The saw is often used to manually cut out defects in the material.
net price invoice va
Ijdpfst Dxwaex Abxstn
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
- year of production 1998
TECHNICAL PARAMETERS:
diameter of the main saw ⌀ 350 mm
max. sawing height 70 mm
max. sawing width 150 mm
engine power 3 kW
rotational speed of the spindle 4500 rpm
diameter of spindle tip ⌀ 30 mm
nominal pressure of compressed air 0,6 Mpa
frequency of working cycles 0 - 28 cycles/min
max. stroke of saw 100 mm
connection diameter of suction nozzle 1 x ⌀ 125 mm
air demand (in dust extraction system) 1300 m3/h
height to table surface 850 mm
weight 160 kg
The DMDK-35 circular saw is used for transverse sawing of wood.
The maximum cutting width is 220 mm with a height of 35 mm.
The saw is controlled by a foot switch.
The saw guard assembly is equipped with safety curtains.
The material is pressed with two point presses.
This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min.
The saw is often used to manually cut out defects in the material.
net price invoice va
Ijdpfst Dxwaex Abxstn
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2011
تقديم الطلب
الهاتف & فاكس
+48 63 30... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ