غسالة حاويات KLT، غسالة KLT،

Reinigungssysteme myjka, Einsätze KLT - durchl

Boxes, KLT inserts, and lids – continuous washing machine.

Continuous flow washer for KLT containers, box washing system
Automatic washer for KLT containers, tray washer, washer for various components
- Washing
- Rinsing
- Oil removal
- Drying
- 2 lanes
- 2 x 600 KLT/h
- External heating system
- Possible transport, dismantling, and loading
Boxes, KLT inserts, and lids – continuous washing machine.

Maximum passage width: 300 mm
Maximum passage height: 650 mm

Contamination: dust, mineral grease, mineral oil, metal shavings

System Description

The system and piping are made of high-quality stainless steel, ensuring a long service life.

The machine is a two-lane chain conveyor-type continuous washing system. Its unique modular design allows for future expansion of an existing system, ensuring that the installation will not become undersized as requirements increase. The system can be expanded along with operational or additional requirements.

Hot water heating: Heat exchanger in the washing tanks connected to the heating circuit. Recommended supply temperature: 90°C
Nozzle pipes: Screw-fitted
Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks
Item counter on both lanes

System Features:
• Stainless steel infeed module
• Stainless steel washing module 1
• Stainless steel washing module 2
• Stainless steel cold air blow-off
• Stainless steel warm air drying module
• Stainless steel warm air drying module
• Stainless steel outfeed module
• Transport system
• Drive with steplessly adjustable conveyor speed
• Heating: Pipe heat exchanger in the washing tanks
• Control cabinet with electric control
• Access and cleaning doors on both sides of the system
• Thermal insulation of the washing tanks and sound insulation on the fan units

Technical Data:

Overall dimensions: Length: 12,350 mm
Width: 1,950 mm (2 lanes)
Height: 2,800 mm (total height including fans)

Electrical Power Requirement
Washing pump 1: 7.50 kW
Washing pump 2: 7.50 kW
Cold air blow-off: 5.50 kW
Warm air blow-off 1: 2x
Warm air blow-off 2: 2x
Warm air heating register: 4x
Drive: 0.55 kW
Fume extraction fan: 3.00 kW

Voltage: 400 V
Frequency: 50 Hz
Protection class: IP 55

System control cabinet is installed next to the machine.
The control cabinet contains all components necessary for system operation and monitoring.
Device layout and cabling conform to applicable VDE regulations.

The power supply cable to the control cabinet must have a minimum excess length of 2 meters.
Emergency stop switches are installed in both the loading and unloading zones.

A hot water supply of approx. 90°C is required for heating the washing tanks.
Fedpowi Nl Isfx Abxogh

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.