آلة صنفرة الحوافRehnen
Hoku KS 150
آلة صنفرة الحواف
Rehnen
Hoku KS 150
سعر ثابت دون ضريبة القيمة المضافة
٤٬٢٥٠ €
الحالة
جديد
الموقع
Haldensleben 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
٤٬٢٥٠ €
- الموقع:
- Gerikestrasse 91, 39340 Haldensleben, DE
اتصل
تفاصيل العرض
- معرّف القائمة:
- A19041021
- التحديث الأخير:
- في ٢٩.٠٤.٢٠٢٥
الوصف
Hoku KS 150 edge sander manufactured by Rehnen.
The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination;
Motor protection switch and main switch in accordance with VDE regulations;
Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm;
The sanding belt back panel is covered with a graphite sliding coating;
The machine is supplied with an assortment of sanding belts;
A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s.
- Swivels 90-180°
- Motorized belt oscillation
- Small support table on the idler pulley
- Pneumatic belt tensioning
Technical specifications:
Motor power: 2.2 kW
Sanding belt dimensions: 150 x 2280 mm
Kdsdpfx Aswgc D Sobxju
Sanding belt speed: 22 m/s
Table size: 750 x 350 mm
Space required: 1000 x 800 mm
Weight: from 180 kg
Extraction diameter: 100 mm
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination;
Motor protection switch and main switch in accordance with VDE regulations;
Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm;
The sanding belt back panel is covered with a graphite sliding coating;
The machine is supplied with an assortment of sanding belts;
A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s.
- Swivels 90-180°
- Motorized belt oscillation
- Small support table on the idler pulley
- Pneumatic belt tensioning
Technical specifications:
Motor power: 2.2 kW
Sanding belt dimensions: 150 x 2280 mm
Kdsdpfx Aswgc D Sobxju
Sanding belt speed: 22 m/s
Table size: 750 x 350 mm
Space required: 1000 x 800 mm
Weight: from 180 kg
Extraction diameter: 100 mm
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2004
تقديم الطلب
الهاتف & فاكس
+49 3904 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ