مركز بالقطع العمودي
Pinnacle SV116

سنة الصنع
٢٠٠٧
الحالة
مستعمل
الموقع
Kirchheim bei München ألمانيا
مركز بالقطع العمودي Pinnacle SV116
more Images
Pinnacle SV116
عرض الصور
عرض الخريطة

بيانات عن الآلة

وصف الآلة:
مركز بالقطع العمودي
المصنّع:
Pinnacle
الموديل:
SV116
سنة الصنع:
٢٠٠٧
الحالة:
جيد (مستخدم)

السعر والموقع

الموقع:
Benzstrasse 10, 85551 Kirchheim b. München, DE ألمانيا
اتصل

تفاصيل العرض

معرّف القائمة:
A16238077
الرقم المرجعي:
MW1409
التحديث الأخير:
في ١٥.٠٧.٢٠٢٥

الوصف

The machine bed and stand are made of cast iron.
torsionally rigid.
The machine type SV-116 has flat guides in all axes.
flat guides
All flat guides are hardened and ground
The main spindle and all axes are driven by HEIDENHAIN
AC motors,
High-precision preloaded ball screws in all axes,
as well as a fully protected cabin with a three-sided enclosure
and a central lubrication system with freely selectable
lubrication cycles
Standard equipment:
* Control: HEIDENHAIN iTNC 530 smarT.NC
* Full enclosure with 2 sliding doors on the front and
window (side) according to CE standard.
* 2 fluorescent tubes for optimum work area lighting.
* Mechanical weight compensation of the boom.
* 200 liter coolant system.
* Chip flushing system in the entire work area.
* Ammeter.
* Electronic handwheel HR-410 with 2.5 m spiral cable.
* Blow-out device for the spindle.
* Chip conveyor hinged belt included
Chip trolley.
* AC motor and drives from HEIDENHAIN DIGITAL.
* Complete preparation of 4th axis incl. cabling and plugs.
plugs.
* Coolant flushing gun (workpiece flushing).
* Compressed air gun on the spiral hose.
* Ethernet card for fast data transfer and possibility
possibility of network integration.
* Controlled compressed air nozzle on the spindle head
* Oil cooling unit to keep the spindle bearing temperature constant.
temperature.
* Internal coolant supply through the spindle (IKZ) with a pressure of
a pressure of 20 bar.
* Mobile additional tank with paper belt filter and base pumps
Ijdjttvt Sjpfx Abxotn
Capacity 600 liters. Easy to position on rollers
positionable.
* Full encapsulation of the machine, also above the automatic tool changer.
tool changer.
* Speed 10000 rpm.
* Main spindle motor from HEIDENHAIN / INDRAMAT
Type: QAN 200 U 10Kw ( 16 Kw ) drive power.
Power at ED S1 (100%) 10 Kw
Power at ED S6 ( 40% ) 16 Kw
Technical data:
Table dimensions (mm): 1300 x 600
Max. Workpiece weight: 850 kg *
Distance from spindle nose to table surface: 100-710 mm
Distance from spindle center to Z-axis guide: 645 mm
Spindle holders: SK-40DIN 69871
Inner diameter of the front spindle bearing: 70 mm
Ball screws in all axes: Diameter 40x8 mm
Ball screws preloaded without play
Tool clamping force: 950 kg
Travels:
X: 1145 mm
Y: 615 mm
Z: 615 mm
Number of grooves: 5
Groove spacing: 100 mm
Groove quality: 18mm
Center groove: 18H12
Spindle motor: Heidenhain QAN 200L DIGITAL
Axis drives: Heidenhain QSY 155B DIGITAL
Speed range: 60-10000rpm
Coolant pump power: 400 watts
Power of the central lubrication pump: 75 watts
Rapid traverse X- and Y-axis: 25 m/min
Rapid traverse Z-axis: 24 m/min
Positioning accuracy and
Repeat accuracy: +/- 0.005 mm
Tool changer:
Tool changer type: Double gripper
Number of tools: 24
Max. Tool diameter with
full occupancy: 75/125
Max. Tool weight: 7 kg
Max. Tool length: 250 mm
Tool change time: 1.8 sec.
Chip-to-chip time: 5 sec.
Tool holder taper: SK40 DIN 69871
General connection data and dimensions:
Air connection: 6 bar
Total connected load: 25 KVA
Rated voltage: 380V 50/60 Hz
Machine weight min.: 7500 kg
Machine dimensions (LxWxH): 3100x2200x2662
Transport height incl. rollers: 2450 mm
Further options possible at any time:

QAN 200UH. Direct drive
12000 rpm,
Power at 100 % duty cycle = 10 Kw
Power at 40 % duty cycle = 15 Kw

RMP60/RMI radio touch probe for machine tools
which is equipped with FHSS radio transmission.
(Frequency Hopping Spread Spectrum)

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.

مورد

اتصل

تقديم الطلب

أرضus 
ألمانيا
النمسا
سويسرا
الولايات المتحدة الأمريكية
المملكة المتحدة
فرنسا
بلجيكا
إسبانيا
المكسيك
إيطاليا
هولندا
بولندا
الاتحاد الروسي
بيلاروس (جمهورية بيلاروس)
أوكرانيا
إستونيا
تركيا
نيوزيلندا
أيرلندا
جمهورية التشيك
الدانمارك
فنلندا
السويد
النرويج
لوكسمبورغ
اليونان
ليتوانيا
لاتفيا
آيسلندا
البرتغال
البرازيل
فنزويلا
الأرجنتين
المجر
سلوفاكيا
رومانيا
مولدوفا
سلوفينيا
صربيا
الجبل الأسود
ألبانيا
كرواتيا
بلغاريا
مقدونيا الشمالية
البوسنة والهرسك
إسرائيل
مصر
المغرب
الهند
إندونيسيا
كوريا الجنوبية
اليابان
تايلاند
ماليزيا
فيتنام
China
تايوان
إيران
بنغلاديش
أفغانستان
ملاحظة: سيتم إرسال طلبك إلى جميع البائعين في فئة الماكينات. وبهذه الطريقة يمكنك الحصول على العديد من العروض.
تعذر إرسال الطلب. يرجى المحاولة مرة أخرى لاحقًا.

الهاتف & فاكس

+49 89 44... إعلانات