آلة ثني الأنابيب

PBS Tubobend 30 BF simply smart

Semi-automatic tube bending machine for tubes up to 30 mm
with extended bending clearance, especially for meander bending

Standard equipment:
• Operation via Siemens Touch Panel KTP 600
• Function keys and plain text display for operator guidance
• Program memory internally for 100 programs with 20 data sets each
• Bending axis electronically controlled
• Automatic bending angle adjustment
• Target/actual value display for bending angle
• Control panel swiveling
• Bending head freestanding
• Tube clamping hydraulically, clamping pressure adjustable
• Guide block adjustment hydraulically
• Bending mandrel extension hydraulically
• Machine can be used in a mobile manner
• Extended bending clearance for bending radii up to R max = 200 mm

1 TUBOBEND 30 with tube feed length 1,500 mm

Technical data:
Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD)
Bending radius up to: 200 mm
Control: electronic
Effective bending angle (max.): 180° (+10° overbending)
Switch-off accuracy: ± 0.1°
Bending speed (max.): 45°/s
Dimensions L/W/H: 2200 / 600 / 1100 mm
Weight: approx. 500 kg
Power: 1.5 kW
Connection data: 400 V / 50 Hz / 3 phases
Mains fuse: CEE 16 A
Color: RAL 5015 blue

Optional equipment

1 piece. Length stop device, length 1500 mm
1 piece. Early mandrel retraction to optimize arc quality
Isdpjzichaefx Ag Dsti
• For use with ball mandrels
• Mandrel is automatically retracted during the bending process
• Adjustment up to 10° continuously programmable
1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system
Pneumatic dosing device HP-Microspray (compressed air connection required)
1 piece. Safety foot switch for clamping and bending function
1 piece. Adjustable bending speed

Note/Remark:
The tube is approximately 500 mm round at the beginning and end of the bend
(tube and tool = Ø 33.7 mm).
The tube is only flattened into a flat oval tube in the spiral.
The spiral only has one bend at each end.
Bending of return bends is not possible.
Since the tube is round, a pre-rotation can be performed to compensate for the slope.
The position of the bend or the spiral must be determined using an external device.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.