مكبس قشرة خشبORMA
HL 5100x1400
مكبس قشرة خشب
ORMA
HL 5100x1400
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٤٩٬٠٠٠ €
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
جمهورية التشيك 

البيانات الأساسية
- اسم الماكينة:
- مكبس قشرة خشب
- الشركة المصنعة:
- ORMA
- طراز:
- HL 5100x1400
- الحالة:
- تمت صيانته في الورشة (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٤٩٬٠٠٠ €
- الموقع:
- Draha 427, 66459 Telnice, Česká republika

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A18383796
- تحديث:
- آخر مرة في 19.11.2026
وصف
Veneering press line, consisting of the following machines:
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
Kodpsvva Syefx Aphjnd
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
- OSAMA S2R adhesive applicator – 1300 mm – NEW MACHINE
- Feeder from the adhesive applicator to the conveyor
- Infeed conveyor, 6000 mm long x 950 mm wide, with drive
- Flat hydraulic press ORMA 5100x1400 mm – 12 pistons, minimum pressure 190 tons
Kodpsvva Syefx Aphjnd
- Outfeed conveyor, 6000 mm long x 950 mm wide, with drive
This press requires medium to high pressure for operation, to ensure the boards are 100% flat.
- Veneer board dimensions: 5100 x 1400 mm (solid, drilled steel boards, 50 mm thick)
- Board opening: 180 mm
- Total maximum pressure: 190 tons (or more)
- Pressure at full surface: up to 10 kg/cm2
- Number of hydraulic pistons: 12 pcs – piston diameter 140 mm
- MYLAR Teflon film on the boards
- Prepared for heating the boards with hot water, steam, or oil – without a boiler
- Machine dimensions: 2300 x 5100 mm x 2500 mm high, estimated weight 16 tons
--The press features a semi-automatic loading and unloading mode. After pressing the start button, the material is fed into the press, the pressing cycle starts automatically, and after the set time, the press opens. Material is unloaded at the beginning of a new cycle.
--The pressing plates are coated with MYLAR film, which facilitates material loading. These are solid steel plates with internal channels and a thickness of 50 mm. The plates themselves weigh approximately 4 tons, and the total weight of the press is about 16 tons.
--The press heating system is not currently connected in our facility. It was originally connected to a boiler and hot water or steam distribution system. Oil can also be used as a heat transfer medium to achieve high temperatures. There are companies that specialize in this type of equipment. The board heating temperature depends on the type of heat transfer medium used.
Price: 49,000 EUR excluding VAT, without the OSAMA adhesive applicator
Price: 58,000 EUR excluding VAT, including the OSAMA adhesive applicator
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2020
١٠ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+420 530 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Bitburg
٣٬٣٠٤ km
آلة تطبيق الغراء
OsamaS4R/P-1400
OsamaS4R/P-1400
ناجح
تم إرسال رسالتك.
إعلان صغير
Bad Oeynhausen
٣٬٣٧٢ km
ماكينة تغليف/ تغليف الفيلم
CMBEBC 150/70 ERL 150
CMBEBC 150/70 ERL 150
ناجح
تم إرسال رسالتك.
إعلان صغير
Barntrup
٣٬٣٣٦ km
مركز تشغيل CNC من نوع SCM Morbidelli N100 22-31 PROSPACE (سنة 2022)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
ناجح
تم إرسال رسالتك.
إعلان صغير
Sliven
١٬٨١٢ km
طلاء الأسطوانة
CeflaSmartcoater MF EVO
CeflaSmartcoater MF EVO
ناجح
تم إرسال رسالتك.
إعلان صغير
Barntrup
٣٬٣٣٦ km
مركز تشغيل CNC رأسي BIESSE Brema EKO 2.2 (سنة الصنع: 2022)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
ناجح
تم إرسال رسالتك.
إعلان صغير
Timișoara
٢٬٢٧٢ km
مجفف بالأشعة فوق البنفسجية
CeflaFV 2 / 3500-46 SERTARE UVR2M
CeflaFV 2 / 3500-46 SERTARE UVR2M
ناجح
تم إرسال رسالتك.
إعلان صغير
Sesto Calende
٢٬٨٧٧ km
مركز تصنيع الناقل
UniteamCovertek
UniteamCovertek
ناجح
تم إرسال رسالتك.
إعلان صغير
تركيا
١٬٤٧٩ km
كوماتسو PC350 روك دلو
KomatsuPC350 Rock Bucket
KomatsuPC350 Rock Bucket
ناجح
تم إرسال رسالتك.
إعلان صغير
Roreto
٢٬٨٥٤ km
أداة تفريغ الحمولة (قفص مفرد)
RBO (BIESSE Group)Tornado SC/FE 1300
RBO (BIESSE Group)Tornado SC/FE 1300
ناجح
تم إرسال رسالتك.
إعلان صغير
Plovdiv
١٬٧٩٠ km
مركز القطع
ITALMACPegaso
ITALMACPegaso
تم حذف إعلانك بنجاح
حدث خطأ











































































































