ماكينة قطع غاطسة (EDM)

OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition.

The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually.

During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed.

The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced.

In addition, the machine was completely repainted and is now in very good cosmetic condition.

The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation.

Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll.

The machine is immediately ready for operation and is ideal for reliable production.

Technical data:
Ingersoll (OPS Ingersoll)
Wire EDM machine
OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture 2009
Control system
EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld - multifunctional handheld device
Manual erosion with Powertec Handheld
High-speed jump max. 18 m/min
Generator output 60 amps, EAGLE Powertec
Travel ranges (X, Y, Z) 525 x 400 x 450 mm
Electrode changer 20-position pick-up disc changer
Work tank (W x D x H) 770 x 670 x 440 mm
Work table (W x D) 750 x 650 mm
Load capacity 1,000 kg
Accessories:
CO2 fire extinguishing system
Fgsdpfx Aboyrqpfe Sjh
Integrated cartridge filter system

Special equipment:
Linear measuring system in all axes (Z as standard)
30.09

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.