مخرطة CNC

Okuma LB2000 EX II MYC

Standard technical data:
Swing diameter over bed: 580 mm
Swing diameter over carriage: 470 mm
Maximum machinable diameter: 360 mm
Max. workpiece length: 250 mm
Traverse (X): 260 mm
Traverse (Z): 350 mm
Traverse (Y): 100 mm (+/- 50)
C axis: 360 degrees (0.001-degree increments)
Spindle speed: 50-6,000 rpm
Spindle nose: JIS A2-6
Spindle bore diameter: Ø62 mm
Front spindle bearing diameter: Ø100 mm
Turret type: M-V12
Number of tools: 12
Tool size: 20x20 mm
Tool shank diameter: Ø32 mm
Tool change time: 0.1 sec
Driven tool speed: 45-6,000 rpm
Rapid traverse (X): 25 m/min
Rapid traverse (Z): 30 m/min
Rapid traverse (Y): 12.5 m/min
Main motor power (15 min/continuous): 11/7.5 kW (PREX)
Driven tool motor power: 5.5/3.7 kW (PREX)
Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm
Machine weight: 4,050 kg
Control: OSP P300L

Standard specification:
1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC
1 set
European Standard Specification
1-1. V12 radial turret head, 1 set
1-2. Spindle, 1 set
(1) Spindle speed: 50-6,000 rpm (1 set)
(2) Spindle motor PREX 11/7.5 kW (1 set)
(3) Spindle: JIS A2-6; bore Ø62 mm (1 set)
(4) C-axis control, 360 degrees (0.001-degree increments) (1 set)
(5) SR1146 hydraulic cylinder for chuck (1 set)
1-3. MT4 tailstock
1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets
1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set
1-6. Driven tool speed: 45 - 6,000 rpm, 1 set
1-7. Work area lighting, 1 set
1-8. Full enclosure, 1 set
1-9. Chip tray, 1 set
1-10. Door interlock, 1 set
1-11. Lubrication monitoring, 1 set
1-12. Automatic chuck open/close on main spindle, 1 set
1-13. Chip air blow, 1 set
1-14. Foundation bolts, 1 set
1-15. Tool setter, 1 set
1-16. CE marking, 1 set
1-17. IEC standard compliance, 1 set
1-18. Transformer, 1 set
1-19. Coolant system with 250W pump, 1 set
1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set
1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set)
* Multitasking machines coordinate conversion (1 set)
Hfodoy H H Afopfx Acnoh
* Multitasking machines profile generation (1 set)
* Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set)
* Real 3D simulation (1 set)
* Cycle time monitoring (1 set)
* Load monitor (1 set)
* NC operation monitor (1 set)
* Cycle time reduction function (1 set)
* Hi-Cut Pro (machining-specific servo optimization) (1 set)
* Variable spindle speed control (1 set)
1-22. 2-stage position indicator lamp, 1 set
1-23. Program storage: 2GB, 1 set
1-24. Operation memory: 2MB, 1 set
1-25. Spindle orientation, electric, 1 set
1-26. Inch/metric conversion, 1 set
1-27. Ball screw pitch error compensation on X/Z axes, 1 set
1-28. Workpiece ejection monitoring, 1 set
1-29. Lifting hooks, 1 set
1-33. TAS-C thermal compensation on the frame
6” chuck
Chip conveyor

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.