محبب إعادة التدويرNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
محبب إعادة التدوير
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
١٥٠٬٠٠٠ €
سنة الصنع
٢٠١٣
الحالة
مستعمل
(وظائف محدودة)
الموقع
Bergen op Zoom 

بيانات عن الآلة
- اسم الماكينة:
- محبب إعادة التدوير
- الشركة المصنعة:
- Next Generation Recyclingmaschinen GmbH
- طراز:
- F:Gran 145-20
- رقم الماكينة:
- 12090
- سنة الصنع:
- ٢٠١٣
- الحالة:
- يحتاج إلى إصلاح (مستعمل)
- الوظائف:
- وظائف محدودة
- ساعات التشغيل:
- ٧٬٧٠٠ h
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
١٥٠٬٠٠٠ €
- الموقع:
- Bergen op Zoom, هولندا

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A22402837
- رقم المرجع:
- Z032
- تحديث:
- آخر مرة في 23.07.2026
وصف
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Bsdsznz Ezopfx Al Sowr
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Bsdsznz Ezopfx Al Sowr
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مستندات
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2026
١٤ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+43 660 2... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


























