آلة شحذ

Nagel 2 VS 8 - 50 T

TECHNICAL DETAILS
Control: Siemens PLC control S7, NAGEL honing spindle control MS-U3
Production capacity: 90 workpieces/h at 100 % capacity utilization
Roundness: 0.006 mm / 0.012 mm
Bore tolerance: 22.018 - 22.028 mm / 56.000 - 56.019 mm
Surface roughness (Rz): 4 µm / 6.3 µm
Honing time: 28 / 33 seconds
Secondary time: 12 / 7 seconds
Cycle time: 40 seconds

Workpiece
Type: Connecting rod, large and small eye
Hardness: 100 - 130 HB
Machining diameter: 22 - 26 mm
Machining length: 20.8 - 20.23 mm
Workpiece holder: clamped and held down

Machining data
Pre-machining: fine turned
Diameter: 21.99 - 22.01 mm / 55.95 - 55.99 mm
Roundness: 0.007 mm / 0.01 mm
Surface roughness (Ra): 6 - 8 / 8 - 12 µm
Material allowance: 0.013 - 0.033 mm / 0.02 - 0.06 mm

Tool type
Tool type: Diamond, articulated rod

Honing spindle
Number of honing spindles: 2
Stroke length: 0 - 500 mm
Stroke speed: 25 m/min (infinitely variable)
Tool holder: top / bottom, infinitely adjustable
Spindle speed: 425 - 1,275 rpm and 120 - 360 rpm

Drive power
Stroke drive power: 5.5 kW
Spindle drive power: 3 kW / 4 kW

Measuring technology
Measuring system: electro-mechanical step expansion
Air measuring device: 0.0005 - 0.08 mm

MACHINE DETAILS
Installation area / height: 6,200 x 3,900 / 4,300 mm
Weight: approx. 8 t
Color: machine light grey RAL 7035, control cabinet capri blue RAL 5019
Construction: Welded steel construction in panel construction. The uprights have been artificially aged to relieve stresses.

Hydraulic equipment
Hydraulic tank: 400 l

Electrical equipment
Operating voltage: 400 V, 50 Hz with neutral conductor
Control voltage: DC 24 V
Total connected load: 28 kW
Standard: according to VDE 0113

Note: Machine is set up but not connected & can be inspected under power on request