ماكينة تفريز من نوع السريرMTE
Kompakt Plus
ماكينة تفريز من نوع السرير
MTE
Kompakt Plus
سنة الصنع
٢٠٠٤
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Nordrhein-Westfalen 

مراقبة المزاد
البيانات الأساسية
- اسم الماكينة:
- ماكينة تفريز من نوع السرير
- الشركة المصنعة:
- MTE
- طراز:
- Kompakt Plus
- رقم الماكينة:
- 04120594
- سنة الصنع:
- ٢٠٠٤
- الحالة:
- جاهز للاستخدام (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٢٩٬٣٣٧ h
تفاصيل فنية
محاور
أقصى سرعة للمغزل:
١٢٬٠٠٠ دورة/دقيقة
مواصفات المحور
مسافة الحركة محور X:
٢٬٠٠٠ مم
مسافة الحركة لمحور Y:
٨٩٥ مم
مسافة الحركة لمحور Z:
٨٩٥ مم
مزيد من التفاصيل
طراز وحدة التحكم:
Heidenhain iTNC 530
توفير
- الموقع:
- Nordrhein-Westfalen, ألمانيا
– المسافة: تقريباً ٣٬٣٧٦ كم
- التوفر:
- مباشرة بعد انتهاء المزاد
- شروط التسليم:
- EXW
تكاليف التفكيك والتحميل:
الاستلام في الموقع:
مجاني
مجاني
تكاليف الشحن:
وصف
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
Hodpfxo Aknvwj Ap Ionw
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
Hodpfxo Aknvwj Ap Ionw
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
The machine is still in productive use.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
معالجة المدفوعات
- تكاليف الشراء الإضافية:
- ١٨ %
- شروط الدفع:
- %100 دفعة مقدمة
- طريقة الدفع:
حوالة مصرفية
تفاصيل العرض
- معرّف الإعلان:
- A23342642
- رقم المرجع:
- AUC-2611420
- تحديث:
- آخر مرة في 16.11.2026
- عرض حصري:
- متوفر فقط في المزاد
معاينة
إمكانية المعاينة
الآلة تحت التيار الكهربائي
توصي Machineseeker بشكل عام بمعاينة الآلات.
جميع البيانات مُقدَّمة حسب أفضل علم وضمير – تفضلوا بالتحقق بأنفسكم في الموقع.
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Dortmund
٣٬٣٧٥ km
آلة طحن السرير باستخدام الحاسب الآلي
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ١٨ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
تم حذف إعلانك بنجاح
حدث خطأ























