مخرطة CNCMEXPOL
CNC-Maschine SINUMERIK 802D sl T/M plus
مخرطة CNC
MEXPOL
CNC-Maschine SINUMERIK 802D sl T/M plus
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٥٬٦٠٠ €
سنة الصنع
٢٠٠٩
الحالة
مستعمل
(وظائف محدودة)
الموقع
Hilden 

السعر والموقع
EXW في بي بالإضافة إلى ضريبة القيمة المضافة
٥٬٦٠٠ €
- الموقع:
- Kleinhülsen 31 Hilden, 40721 Hilden, Deutschland

اتصل
تفاصيل فنية
محاور
ثقب المغزل:
١٠٣ مم
أقصى سرعة للمغزل:
٢٬٠٠٠ دورة/دقيقة
سرعة المغزل (دقيقة):
٨ دورة/دقيقة
مزيد من التفاصيل
قطر الخراطة:
٥٨٠ مم
قُطر الخراطة فوق الزلّاقة العرضية:
٨٣٠ مم
طول الخراطة:
١٬٢٥٠ مم
سرعة الدوران متغيرة بلا حدود
تفاصيل العرض
- معرّف الإعلان:
- A21938233
- تحديث:
- آخر مرة في 09.07.2026
وصف
Complete CNC component set Siemens 802 D – bed and guide rails ground
Description:
CNC component set / machine construction kit with Siemens Sinumerik 802D control.
The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion.
All components are present.
Key highlights:
• Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015.
• Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision).
• Control: Includes a functional Siemens Sinumerik 802D CNC control.
• Feed drive SIEMENS, main motor regulator from Siemens
• Completeness: All related parts and assemblies are in stock and ready.
Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty.
Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled:
• Maximum turning diameter over bed: 830 mm
• Maximum turning diameter over slide: 580 mm
• Maximum bar diameter: 103 mm
• Maximum turning length between centers: 1250 mm
• Rapid traverse rate in X/Z axis: 10 m/min
• Spindle speed range: 8–2000 rpm
• Number of steps for adjusting the spindle speed: 3
• Diameter of the front spindle bearing: 140 mm
• Power of the spindle drive: 15 kW
• Maximum spindle torque: 2100 Nm
• Bed width: 520 mm
• Height of the centers above the bed guides: 420 mm
• Diameter of the tailstock quill: 105 mm
• Extension of the tailstock quill: 200 mm
• Taper of the tailstock quill: Morse 6
• Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm)
Iodey Sub Hjpfx Aphotp
• Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm)
• Coolant pump capacity: 25 l/min
• Power of the coolant pump motor: 0.18 kW
• Speed of the coolant pump motor (50 Hz): 2800 rpm
• Installed power: 22 kW
• Power supply: 3x 400 V; 50 Hz
Equipment of the lathe TUB 830C:
• CNC control: SIEMENS SINUMERIK 802D
Sales and delivery conditions:
• Loading: Loading onto your transport vehicle is included in the price.
• Delivery: Ex-works Hilden.
• Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Description:
CNC component set / machine construction kit with Siemens Sinumerik 802D control.
The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion.
All components are present.
Key highlights:
• Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015.
• Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision).
• Control: Includes a functional Siemens Sinumerik 802D CNC control.
• Feed drive SIEMENS, main motor regulator from Siemens
• Completeness: All related parts and assemblies are in stock and ready.
Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty.
Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled:
• Maximum turning diameter over bed: 830 mm
• Maximum turning diameter over slide: 580 mm
• Maximum bar diameter: 103 mm
• Maximum turning length between centers: 1250 mm
• Rapid traverse rate in X/Z axis: 10 m/min
• Spindle speed range: 8–2000 rpm
• Number of steps for adjusting the spindle speed: 3
• Diameter of the front spindle bearing: 140 mm
• Power of the spindle drive: 15 kW
• Maximum spindle torque: 2100 Nm
• Bed width: 520 mm
• Height of the centers above the bed guides: 420 mm
• Diameter of the tailstock quill: 105 mm
• Extension of the tailstock quill: 200 mm
• Taper of the tailstock quill: Morse 6
• Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm)
Iodey Sub Hjpfx Aphotp
• Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm)
• Coolant pump capacity: 25 l/min
• Power of the coolant pump motor: 0.18 kW
• Speed of the coolant pump motor (50 Hz): 2800 rpm
• Installed power: 22 kW
• Power supply: 3x 400 V; 50 Hz
Equipment of the lathe TUB 830C:
• CNC control: SIEMENS SINUMERIK 802D
Sales and delivery conditions:
• Loading: Loading onto your transport vehicle is included in the price.
• Delivery: Ex-works Hilden.
• Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مستندات
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2018
١٠ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2103 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Hessisch Lichtenau
٣٬٢٤٤ km
خط ISBM = آلة التشكيل بالنفخ والتمديد بالحقن، ماكينة النفخ والتمديد لزجاجات PET ذات الاستخدام الواحد
ETEK / GF-IndustriesSupra 800 sv 1
ETEK / GF-IndustriesSupra 800 sv 1
ناجح
تم إرسال رسالتك.
إعلان صغير
Hergensweiler
٢٬٩٥٣ km
القرص الدوار اللحام ، القرص الدوار ،
ProtecW 5000
ProtecW 5000
ناجح
تم إرسال رسالتك.
إعلان صغير
Stockstadt am Rhein
٣٬١٩٢ km
آلة طحن البوابة
SkymasterVM 2018
SkymasterVM 2018
ناجح
تم إرسال رسالتك.
إعلان صغير
Cesena
٢٬٥٤٧ km
آلة لف الصفائح
OMCCA4ROLL 3000X40 MM PLATE ROLL
OMCCA4ROLL 3000X40 MM PLATE ROLL
ناجح
تم إرسال رسالتك.
إعلان صغير
Cestona
٣٬٤٨٩ km
مخرطة CNC
GEMINISGHT 4 720X3000
GEMINISGHT 4 720X3000
ناجح
تم إرسال رسالتك.
إعلان صغير
Root
٢٬٩٩١ km
حامل الأدوات
VDI30
VDI30
ناجح
تم إرسال رسالتك.
إعلان صغير
Cantabria
٣٬٦١٣ km
آلة حقن صب
KraussMaffeiKM 420-2000 CX
KraussMaffeiKM 420-2000 CX
ناجح
تم إرسال رسالتك.
إعلان صغير
Düsseldorf
٣٬٣٨٨ km
مخرطة البرج العمودية - عمود واحد
SCHIESS MOWEGBERTHIEZ TFM 125
SCHIESS MOWEGBERTHIEZ TFM 125
ناجح
تم إرسال رسالتك.
إعلان صغير
ألمانيا
٣٬٢٠٨ km
آلة طحن البوابة
INGERSOLL-BOHLE
INGERSOLL-BOHLE
ناجح
تم إرسال رسالتك.
إعلان صغير
Bad Oeynhausen
٣٬٣٦٨ km
ماكينة تفريز بعمود متحرك
SoraluceFR 10.000
SoraluceFR 10.000
تم حذف إعلانك بنجاح
حدث خطأ






































































































