دباسة هوائيةMEROLOCK
3
دباسة هوائية
MEROLOCK
3
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٦٦ €
سنة الصنع
٢٠٠١
الحالة
مستعمل
الموقع
Wymysłów 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٦٦ €
- الموقع:
- Wymysłów 10, 62-740 Tuliszków, Polska

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A22978962
- رقم المرجع:
- mb-ce083084-17853881
- تحديث:
- آخر مرة في 15.10.2026
وصف
Top-feeding stapler with clamping anvils. For use with collated staples. Used to close filled folding cartons made of single and double-wall corrugated cardboard.
Economical solution for closing corrugated cardboard boxes with interlocking and overlapping flaps using clamping anvils. Suitable for single and double-wall corrugated cardboard.
Nwsdoz Skpwepfx Ahdsn
Adjustable penetration depth to suit the type of cardboard.
Ideally suited for use in packaging lines where a high degree of accessibility and efficiency is required.
• Housing made of hardened steel for long-lasting durability.
• Clamping anvils return immediately: up to 20 stapling cycles per minute.
• 1000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers.
For comfortable operation, use a balancer in combination with a swivel arm system and a suitable spiral hose. See > accessories.
MEROLOCK pneumatic stapler
• For CR 1/34 spiral staples, arm length 18 mm,
• With noise silencer
• With automatic clamping anvil return.
• The clamping anvils are specially hardened, which extends their service life.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Economical solution for closing corrugated cardboard boxes with interlocking and overlapping flaps using clamping anvils. Suitable for single and double-wall corrugated cardboard.
Nwsdoz Skpwepfx Ahdsn
Adjustable penetration depth to suit the type of cardboard.
Ideally suited for use in packaging lines where a high degree of accessibility and efficiency is required.
• Housing made of hardened steel for long-lasting durability.
• Clamping anvils return immediately: up to 20 stapling cycles per minute.
• 1000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers.
For comfortable operation, use a balancer in combination with a swivel arm system and a suitable spiral hose. See > accessories.
MEROLOCK pneumatic stapler
• For CR 1/34 spiral staples, arm length 18 mm,
• With noise silencer
• With automatic clamping anvil return.
• The clamping anvils are specially hardened, which extends their service life.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
تم حذف إعلانك بنجاح
حدث خطأ











