محرك الغاز

MAN E3262LE212

Standard scope of delivery
• Four-stroke gas engine based on MAN
Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods
- Engine width: 1,243mm
- Engine length: 1,748mm
- Engine height: 1,500mm
- Compression ratio 14:1, special gas
- Speed 1500rpm
- Oil module consisting of radiator, filter and crankcase ventilation
Kodpfx Ahjtpw Dfjzjnd
One oil module per cylinder bank
Crankcase ventilation is integrated at the factory
• Oil pump in rotor pump design
One oil pump per cylinder bank
- Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear
- Starter 24 V / 7.0 kW
• Camshaft with encoder disk for electric ignition system
• Dry exhaust pipe with contact protection
- Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication
• Two-stage mixture cooler
• Mechanical throttle valve without actuator upstream of mixture cooler
- Lubricating oil pan with 102 l volume and filler neck
• without thermostat housing
• Cover for front crankshaft end
- 2x exhaust gas temperature sensor
- 1x coolant temperature sensor - inlet
- 1x coolant temperature sensor - outlet
- 2x oil pressure sensor
- 2x oil temperature sensor
- 2x connecting cable for exhaust gas temperature sensor, length 5 m
- 4x connecting cable for temperature sensor, length 5 m
- 2x connecting cable for oil pressure sensor, length 5 m
• engine feet GS
• Standard MAN factory approval with natural gas “H”
• without Oil filling
• engine openings with sealing cap
• Type plate German / English
• Paint, light gray RAL 7035
1x combined charge air sensor for pressure and temperature
2x exhaust gas temperature sensor
1x coolant temperature sensor - inlet
1x coolant temperature sensor - outlet
2x oil pressure sensor
2x oil temperature sensor