منشار دائري يدوي من الألومنيوم
UK 300 P mit Pneumatik Spanner
منشار دائري يدوي من الألومنيوم
UK 300 P mit Pneumatik Spanner
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٬٥٥٢ €
سنة الصنع
٢٠٢٥
الحالة
جديد
الموقع
Bopfingen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
٢٬٥٥٢ €
- الموقع:
- Gewerbehof 27, 73441 Bopfingen, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A7451681
- تحديث:
- آخر مرة في ١٤.٠٣.٢٠٢٥
وصف
Aluminum circular saw UK 300 P, manual
The UK 300 P is a manual table saw (pneumatic clamping) with simple safer
Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P
has a compact design with clear operation. The saw cut is done manually by
down into the material to be processed. The material is clamped using two pneumatic clamping cylinders.
Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area.
Dkodpfx Aeidqbbegioi
equipment
Compact, closed design with clear operation
two pneumatic clamping cylinders
Fixed protection from the cutting area
Saw blade ø 300 mm
Manual cutting feed
Mist spray device for air-oil cooling
workflow
1) Setting the cutting angle
2) Loading the material
3) Pneumatic clamping of the material
4) Press the start button to start the saw blade
5) the saw cut must be carried out manually with a hand lever
6) after the end of the cut, the machine is switched off!
It is always possible for you to inspect the desired system in our production/demonstration hall.
Please do not hesitate to contact us.
The UK 300 P is a manual table saw (pneumatic clamping) with simple safer
Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P
has a compact design with clear operation. The saw cut is done manually by
down into the material to be processed. The material is clamped using two pneumatic clamping cylinders.
Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area.
Dkodpfx Aeidqbbegioi
equipment
Compact, closed design with clear operation
two pneumatic clamping cylinders
Fixed protection from the cutting area
Saw blade ø 300 mm
Manual cutting feed
Mist spray device for air-oil cooling
workflow
1) Setting the cutting angle
2) Loading the material
3) Pneumatic clamping of the material
4) Press the start button to start the saw blade
5) the saw cut must be carried out manually with a hand lever
6) after the end of the cut, the machine is switched off!
It is always possible for you to inspect the desired system in our production/demonstration hall.
Please do not hesitate to contact us.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2017
إرسال طلب
هاتف & فاكس
+49 7362 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Cochem-Brauheck
٣٬٢٨٥ km
منشار دائري معدني خفيف/ألومنيوم
MTIAS-800
MTIAS-800
إعلان صغير
Velen
٣٬٤٣١ km
آلة الأحراز
WMT156/1.6
WMT156/1.6
إعلان صغير
Rödermark
٣٬١٨٦ km
آلة طحن نهاية
GRAULEAKF 4/250
GRAULEAKF 4/250
إعلان صغير
Barakfakih
١٬٥٠٠ km
منشار ميتري
PLASTMAK PVC ALUMİNYUM İŞLEME MAKİNALARISÇ 402 Alüminyum Pvc Kesim Makinası
PLASTMAK PVC ALUMİNYUM İŞLEME MAKİNALARISÇ 402 Alüminyum Pvc Kesim Makinası
إعلان صغير
Mudersbach
٣٬٢٩٨ km
منشار دائري من الألومنيوم
TubendAC 550
TubendAC 550
إعلان صغير
Rīga
٣٬٣٩٦ km
رأى رأس واحد
FOM INDUSTRIEPANDA 300 ECHO
FOM INDUSTRIEPANDA 300 ECHO
إعلان صغير
Enschede
٣٬٤٦٠ km
توجرا ايه سي-550
TUGRAAC-550
TUGRAAC-550
إعلان صغير
Wiefelstede
٣٬٤٨٨ km
مقصات المقصلة 2 × 2040 مم
RAS53.9
RAS53.9
إعلان صغير
Rödermark
٣٬١٨٦ km
هيدر. هوائي. منشار دائري من الألومنيوم
KALTENBACHSKL 400 H
KALTENBACHSKL 400 H
إعلان صغير
Józefin
٢٬٩٣٦ km
المقص الهيدروليكي 2000/2
METFORMERHCO 2x2000
METFORMERHCO 2x2000
تم حذف إعلانك بنجاح
حدث خطأ










































































