مخرطة مغزل الرصاص / العلف

M-TOS SV 18 R x 1250

Trade show lathe, available from stock.

After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw.

Here is a run-through of a general overhaul at our company:
1. Machine cleaning, disassembly of the individual machine components
2. Grinding: bed, slide, cross support, spindle, tailstock quill
3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge
4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report
5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges)
6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support
7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw
8. Complete bearing replacement in all machine assemblies
9. Complete replacement of machine plates
10. Priming of the machine, sealing, sanding, polyurethane topcoat, and
painting of the machine accessories - white RAL 9003, anthracite RAL 7016
11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area
12. Preparation of the accuracy report and the electrical test report
13. Inspection and machine acceptance at the factory

All refurbished machines have a CE certificate and a 12-month warranty.
CE version:
- Chuck guard with limit switch
- Front chip guard mounted on slide
- Rear chip guard
- Lead screw and feed screw covers
- Brakes after emergency stop within 2 seconds

Special accessories (used):
- Three-jaw lathe chuck Ø 190 mm
- Four-jaw lathe chuck Ø 190 mm
- Three-jaw lathe chuck Ø 240 mm
- Four-jaw faceplate Ø 320 mm
- Support center for bed slide
- Various chuck jaws (10 pieces)
Iisdpfx Aijv Hzqxjyeh
- Collet set Ø 2 - 25 mm with collet chuck + drawbar
- Special collet set (10 pieces) with collet chuck
- 4-way tool holder

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.