ماكينة معالجة البولي يوريثان
Servohydraulischer Formenträger
ماكينة معالجة البولي يوريثان
Servohydraulischer Formenträger
الحالة
مستعمل
الموقع
Marienheide 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- اسم الماكينة:
- ماكينة معالجة البولي يوريثان
- الحالة:
- مجدَّد بالكامل (مستعمل)
السعر والموقع
- الموقع:
- Rönsahler Weg 20, 51709 Marienheide, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A21712708
- تحديث:
- آخر مرة في ١٤.٠٤.٢٠٢٦
وصف
For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek.
Technical data:
Current state-of-the-art: after full overhaul in 2026
Closing force: 600 kN
Stripping force: 300 kN
Hydraulic operating pressure: max. 250 bar
Clamping area: 2,000 x 1,000 mm
Parallel stroke: 750 mm
Opening width: 1,350 mm
Upper platen tilt: 45°
Lower platen tilt: 30°
Total permissible tool weight: max. 100 kN
Max. upper tool weight: 50 kN
Travel speed: 160 mm/s
Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm
Machine weight: 8 tons
Electrical connected load: 45 kW
Operator side: one-sided
Tank volume: 800 liters
The following services have already been performed as part of the mechanical overhaul:
· Disassembly of the mold carrier
· Sandblasting of the mold carrier
· Inspection of weld seams and restoration to proper condition if necessary
· Cleaning, priming, and painting of individual mold carrier components:
- Frame: RAL7035 (light grey)
- Press ram: RAL3000 (flame red)
· Replacement of all bearings and bushings
Gjdpfoy Ax Ifjx Aaheua
· Refurbishment and resealing of drive cylinders
· Assembly of the mold carrier
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Technical data:
Current state-of-the-art: after full overhaul in 2026
Closing force: 600 kN
Stripping force: 300 kN
Hydraulic operating pressure: max. 250 bar
Clamping area: 2,000 x 1,000 mm
Parallel stroke: 750 mm
Opening width: 1,350 mm
Upper platen tilt: 45°
Lower platen tilt: 30°
Total permissible tool weight: max. 100 kN
Max. upper tool weight: 50 kN
Travel speed: 160 mm/s
Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm
Machine weight: 8 tons
Electrical connected load: 45 kW
Operator side: one-sided
Tank volume: 800 liters
The following services have already been performed as part of the mechanical overhaul:
· Disassembly of the mold carrier
· Sandblasting of the mold carrier
· Inspection of weld seams and restoration to proper condition if necessary
· Cleaning, priming, and painting of individual mold carrier components:
- Frame: RAL7035 (light grey)
- Press ram: RAL3000 (flame red)
· Replacement of all bearings and bushings
Gjdpfoy Ax Ifjx Aaheua
· Refurbishment and resealing of drive cylinders
· Assembly of the mold carrier
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
آخر تواجد على الإنترنت: البارحة
مسجل منذ: 2018
٤ إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 2269 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ










