فرامة، ماكينة تقطيع الأخشابmütek
MGZ 1030 - 22 kW
فرامة، ماكينة تقطيع الأخشاب
mütek
MGZ 1030 - 22 kW
سنة الصنع
٢٠٢٥
الحالة
مستعمل
الموقع
Neckartailfingen 

عرض الصور
عرض الخريطة
بيانات عن الآلة
- وصف الآلة:
- فرامة، ماكينة تقطيع الأخشاب
- المصنّع:
- mütek
- الموديل:
- MGZ 1030 - 22 kW
- سنة الصنع:
- ٢٠٢٥
- الحالة:
- شبه جديد (مستعمل)
- الوظائف:
- يعمل بكامل كفاءته
- ساعات التشغيل:
- ٥٥ h
السعر والموقع
- الموقع:
- Grienweg 38, 72666 Neckartailfingen, Deutschland

اتصل
تفاصيل العرض
- معرّف القائمة:
- A20648835
- التحديث الأخير:
- في ٠١.١٢.٢٠٢٥
الوصف
Machine with special rotor
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
Itodpsx Af Rdsfx Ag Ueb
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Available immediately
Advantages:
+ Special rotor, with reduced knife protrusion, suitable for both hard and soft materials
+ 22 kW motor
+ Efficient square blades
*For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste.
Motor: 22 kW; 400 V - 50 Hz - 3 ph,
Screen: 15/20 mm or as agreed (10 to 40 mm possible)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be changed
Extraction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645mm
Sample image above: color of the unit may vary
Weight: 1,920 kg
Standard equipment included:
- Control cabinet with PLC control
- Automatic star/delta starter
- Fast hydraulic system
- Automatic shutdown in rotor idle mode
- Speed: 70–90 rpm for high throughput
- Cycle control to minimize idle times
Itodpsx Af Rdsfx Ag Ueb
- Performance-enhancing step control of hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*Visible in the last 2 images.
- Additional blade row + €2,790
- Segmented bottom + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation)
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Synchronous start-stop with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2005
تقديم الطلب
الهاتف & فاكس
+49 711 5... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Framrach
٢٬٦٢٥ km
ناقل لولبي
ASCOScrew conveyor with Bunker
ASCOScrew conveyor with Bunker
إعلان صغير
Bad Feilnbach
٢٬٨٥٢ km
رف ناتئ
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
3 St. Ständer für Spanplatten / 5 EbenenHöhe 3,2m / Nutztiefe 1,8m / Länge 2,1m
إعلان صغير
Bitburg
٣٬٣٠٤ km
سكين هاكر
EpperM 40 x 40 konkav
EpperM 40 x 40 konkav
إعلان صغير
Klagenfurt am Wörthersee
٢٬٦٣٨ km
مجدَّد
UnthaRS 30
UnthaRS 30
إعلان صغير
Cegléd
٢٬٤٦٥ km
الصحافة بيليه
Gránit-Mill
Gránit-Mill
إعلان صغير
Bad Hönningen
٣٬٣٠٥ km
حاويات صحية
Sanitärcontainer / WC ContainerToilettencontainer
Sanitärcontainer / WC ContainerToilettencontainer
إعلان صغير
Đakovo
٢٬٣٣٤ km
الصحافة بيليه
TEKNO UNOTK- 304
TEKNO UNOTK- 304
إعلان صغير
Petrovče
٢٬٥٦٦ km
تقطيع الخشب
RobustHD 1500/45kW with Z conveyor
RobustHD 1500/45kW with Z conveyor
إعلان صغير
Jeleśnia
٢٬٧٢٥ km
ماكينة ضغط الحبيبات
COMAFERK 100
COMAFERK 100
إعلان صغير
Neckartailfingen
٣٬٠٥٧ km
آلات تقطيع الخشب، آلات تقطيع الخشب، آلات تقطيع الخشب
mütekMRZ 830 ECO
mütekMRZ 830 ECO
تم حذف إعلانك بنجاح
حدث خطأ





































































