مكبس التخريم والتشكيل -ميكانيكي-

MÜLLER PMLE 250 X 2000 R-HK

CONTROLS
.. electronic controls SIEMENS S7 300

PRESS DESIGN
.. drive system: eccentric / crank
.. openings in uprights: yes
.. number of suspensions: 2
.. table cushion: no
.. quick die change system: yes

PRESS FORCES
.. total force (nominal): 250 to

PRESS TABLE
.. table surface (left-right): 2000 mm
.. table surface (front-back): 1100 mm
.. height above floor level: 1105 mm
.. opening in bed (left-right): 1700 mm
.. opening in bed (front-back): 305 mm

SLIDE
.. table surface (left-right): 2080 mm
.. table surface (front-back): 1000 mm
.. stroke rate (max.): 120 /min

SLIDE (MECHAN. PRESS)
.. slide adjustment: 120 mm
.. stroke adjustment: yes
.. stroke min.: 20 mm
.. stroke max.: 180 mm

Godpfxexnwabs Abxeuh
TOOL ASSEMBLY DIMENSIONS
.. shut height (stroke down, adjustment up), BDC: 500 mm
.. distance between columns (H-frame): 2055 mm
.. passline opening (free passage in side columns): 810 mm

DECOILER
.. sheet width max.: 300 mm
.. coil weight max.: 2 to
.. max. diameter of coil: 2000 mm
.. mandrel expansion range up to: 550 mm

LEVELLER UNIT
.. sheet width max.: 310 mm
.. number of leveller rolls: 7
.. diameter of leveller rolls: 80 mm

STRIP-FEEDER
.. feeder type: roll feeder
.. sheet width max.: 200 mm
.. sheet thickness max.: 4 mm
.. speed max.: 120 m/min

ELECTRICAL SPECIFICATIONS
.. total power consumption: 95 kW
.. mains voltage: 400 V
.. mains frequency: 50 Hz

DIMENSIONS / WEIGHTS
.. space requirements -left/right-: 4800 mm
.. space requirements -front/back-: 2750 mm
.. total height: 5400 mm
.. total weight approx.: 57000 kg

ATTACHMENTS (PRESSES)
.. decoiler: yes
.. leveller unit: yes
.. European CE standards: yes


Machine hours: 20,391 h (operating hours)
Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm

Equipment:
- External connecting rods for high tilt stability
- Hydraulic overload protection
- Press force monitoring
- Temperature sensors at the bearing points
- ABS AHM 2.0T decoiler (1999)
- PBK RSD 8/6/300 straightener (2010)
- Loop belt control
- LW-060-02 roller feed (2008)
- Advanced central lubrication system
- Press force monitoring
- Temperature sensors at the bearing points
- Hydraulic tool clamps
- Spring-loaded machine feet

- Optional: Bilz air springs for an additional €7,000