مكبس تجربة هيدروليكي

Müller Weingarten ZE 1000-30

Technical data:

FORCES
Ram force: 10,000 kN
Ram return force: 1,000 kN
Ram cushion force: 2,000 kN
Drawing cushion force (blank holder): 4,000 kN

STROKES
Ram stroke: 1,400 mm
Ram cushion stroke: 200 mm
Drawing cushion stroke: 400 mm

Die height (table to ram)
Stroke upper position: 1,800 mm
Stroke lower position: 400 mm

Table size: 3,000 x 1,900 mm
Ram size: 3,000 x 1,900 mm

Clear space between uprights (left/right): approx. 3,040 mm
Psdpfxoxpctcj Ag Hogg

Table height above floor: 450 mm

Table plate as sliding plate
Sliding direction: front
Sliding travel: 3,000 mm
Sliding speed: 0.5 - 6 m/min
Load capacity: 20 t

Table and ram deflection at F=max.
2/3 surface load: 0.125 mm/m

Drawing cushion size: 2,450 x 1,550 mm

Drawing cushion hole pattern
From left to right: 17 rows = 16 spaces at 150 mm each
From front to back: 11 rows = 10 spaces at 150 mm each

Ram cushion size: 2,450 x 1,550 mm

Ram cushion hole pattern
From left to right: 17 rows = 16 spaces at 150 mm each
From front to back: 11 rows = 10 spaces at 150 mm each

Height above floor: approx. 7,700 mm
Weight, static: approx. 160,000 kg
Installed power, total: approx. 265 kW
Drive power (main drives, 2 x 110 kW): 220 kW

SPEEDS
Ram
Rapid down speed: approx. 600 mm/s
Working speed max. up to 2,500 kN: approx. 37 mm/s
Working speed F max.: approx. 16 mm/s
Return speed: approx. 430 mm/s
Die spotting speed: approx. ≤ 10 mm/s

The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy. The actual technical data and functions of the machine are decisive.

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.